- Bladeren door rubrieken
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT Solar Smart Digital Controller
- RUNNER MPPT Solar Smart Digital Controller
- GALAXY-serie met hoog vermogen
- Mars buiten-serie
- eSmart serie MPPT zonne-controller
- MASTER-serie MPPT-zonneregelaar
- Accessoires
- (Uit product) WISER serie MPPT zonnecontroller
- (Uit productie) Inverter SP Series 350W-20000W
- (Is verwijderd)
- (Uit productie) I-Panda SPC-serie omvormer
- Certificeringen
-
- Inschrijven
-
Ontvang e-mailupdates over nieuwe productenOntvang e-mailupdates over nieuwe producten
- Neem contact op
-
Tel: + 86-755-23091101 & + 86-755-23091100
Fax: + 86-755-23091102
Informatie: info@ipandee.com
Adres: Vloer 2, Gebouw A2, Lilang Software Park, No. 31, Bulay Road, Nanwan Street, Longgang District, Shenzhen
China Postcode: 518000 Contact nu
- Volg ons
-
-
Waarom is de startspanning van de omvormer hoger dan de minimumspanning?
In de fotovoltaïsche netgekoppelde omvormer is één parameter vreemd, dat wil zeggen de startspanning van de inverteringang. Deze spanning is hoger ... -
Hoe het overspanningsprobleem van de wisselstroomomvormer op te lossen?
nufotovoltaïscheOn-grid stroomopwekking wordt steeds populairder, en gewone mensen thuis kunnen PV-centrales in real time zien. Echter, voor de betro... -
Het verschil tussen een verbeterde sinusgolf en een zuivere sinusomvormer
Dit artikel beschrijft het verschil tussen een verbeterde sinusgolf en een zuivere sinusomvormer. ModifiedSine Pure Wave: de meest algemene omvormers ... -
'S Werelds top tien PV-omvormers
De omvormer wordt ook wel de vermogensregelaar genoemd.Aangezien van het gebruik van de omvormer in het fotovoltaïsche energieopwekkingssysteem, kan ... -
Waarom zou de omvormer niet meer werken als het stroomnet uitvalt?
Sommige mensen in de installatie van fotovoltaïsche systemen, zal een soort van hold "stroomstoring, zelfs als er zon is, hun huizen toegang tot elek... -
Wat is het verschil tussen MPPT-functie en zonne-omvormer zonder MPPT-functie?
De MPPT-controller maakt gebruik van de maximale technologie voor het volgen van vermogenspunten om het maximale vermogen uit de zonne-energiecollecti... -
Europa's eerste afvalafvalbedrijf voor fotovoltaïsche panelen
Zonnepanelen hebben een levensduur van 20 tot 30 jaar. Met een paar jaar geleden na het productieproces massaproductie wereldwijde zonne-energie, een ... -
Wetenschappers hebben ontdekt dat zand zonnecellen van silicium kan maken
Volgens de Japanse Kyodo News meldde op 6 november een visiting professor aan de Universiteit van Tokio karpervijver tonen Chendeng mensen open en de ... -
Binnenlandse energieopslag concurrentiepatroon
Energieopslag als een nieuwe markt voor veel batterijfabrikanten in China eninverterVerkopers bieden de mogelijkheid nieuwe zaken uit te breiden en de... -
Portugal zal in 2050 100% hernieuwbare energievoorziening realiseren
Portugese minister van Milieu en Energie transformatie Jo? OPedroMatos Fernandes is gebleken dat Portugal zal 2050 koolstof neutrale en objectieve, da...
-
straat licht mppt zonne-heffing controller met DC uitgang, dc 12v 24v 48v 30a mppt zonne-heffing controller
- DC inpurt: DC 12V/24V/48V auto work
- Max.charge current: 30A
- Max.PV input voltage: DC 100V
- Conversion effeciency: Max.upto 99%
- Charge mode: three stages of fast charge(MPPT), constant voltage,floating charge
- RS 232 communication port
- LED display
Introduction
This is a I-panda I-P-eSMART series MPPT (maximum Power Point Tracking) smart solar controller, with charging and discharging function, increasing 30%~60% efficiency than traditional PWM controller. It has automatic recognition function, three Stages charging function, also supports many kinds of battery charging and discharging, RS232 communication etc, It’s our company’s MPPT solar controller e-SMART series.
Features
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/48V battery system automatic recognition, users would like to use in different system conveniently.
3. DC12V/24V/48V system, maximum PV input voltage up to DC100V.
4. Charge type: three stages charge fast charge(MPPT), constant voltage,
floating charge, protected our battery, lead to a long use age.
5. Discharge type owns always on pattern and always off pattern, it also has PV voltage solar controlling switch pattern.
6. Clients can auto select any one in the 4 kinds of commonly used batteries, Sealed lead acid, vented, Gel, NiCd and custom other batteries.
7. Digital tube display controller battery voltage and charging current,upper computer display various parameters, such as model, PV input voltage, battery types, battery voltage, charging current, charging power, working condition etc.
8. RS232 communication, and that providing communication protocol, it’s convenient for customer’s integration management.
9. This controller could be paralleled infinitely.
10. CE, RoHS Certifications approved; cooperating with clients through the other certifications.
11. 2 years warranty; 3~10 years extended technical service.
Products photos
Parameters
MPPT solar controller modes: |
30A |
||
Charge mode |
MPPT(maximum power point tracking) |
||
Charge method |
Three stages: constant current(MPPT),constant voltage,floating charge |
||
System type |
DC12V/24V/48V |
Automatic recognition |
|
System voltage |
12V system |
DC9V~DC15V |
|
24V system |
DC18V~DC30V |
||
48V system |
DC36V~DC60V |
||
Soft start time |
12V/24V/48V system |
≤3S |
|
Dynamic response recovery and range |
12V/24V/48V system |
500us |
|
MPPT efficiency |
12V/24V/48V system |
≥96.5%,≤99% |
|
INPUT CHARACTERISTICS |
|||
MPPT working voltage and Range |
12V system |
DC14V~DC100V |
|
24V system |
DC30~DC100V |
||
48V system |
DC60~DC100V |
||
Low voltage input Protection point |
12V system |
DC14V |
|
24V system |
DC30V |
||
48V system |
DC60V |
||
Low voltage input Recovery point |
12V system |
DC18V |
|
24V system |
DC34V |
||
48V system |
DC65V |
||
Input over voltage protection point |
12V/24V/48V system |
DC110V |
|
Input over voltage recovery point |
12V/24V/48V system |
DC100V |
|
Maximum PV power |
12V system (W) |
426 |
|
24V system (W) |
852 |
||
48V system (W) |
1704 |
||
CHARGE CHRECTRESTICS |
|||
Selectable Battery Types (Default type is GEL battery) |
12V/24V/48V system |
Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined)) |
|
Constant Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Floating Charge Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Rated Input Current |
12V/24V/48V system |
30A |
|
Current-limiting Protection |
12V/24V/48V system |
35A |
|
Temperature Factor |
12V/24V/48V system |
±0.02%/℃ |
|
Temperature Compensation |
12V/24V/48V system |
14.2V-(The highest temperature-25℃)*0.3 |
|
Output Ripples(peak) |
12V/24V/48V system |
200mV |
|
Output Voltage Stability Precision |
12V/24V/48V system |
≤±1.5% |
|
Output Discharge Characteristics |
|||
Output voltage |
Base on battery voltage |
||
Low voltage output Protection point |
Default 10.5V; recovery 11V; custom available ; |
||
Rated output Current |
30A |
||
The output control |
Always on, always off, PV voltage control switch |
||
Output control set mode |
Controller button or upper computer |
||
Display |
|||
LED digital tube display |
Battery voltage, charge current |
||
LED light display |
Charging indicator light, LOAD indicator light |
||
PC(communication port) |
RS232 |
||
Protection |
|||
Input Low Voltage Protection |
Check the input characteristics |
||
Input Overvoltage Protection |
Check the input characteristics |
||
Charge over voltage power Protection |
yes |
||
Low Voltage output Protection |
yes |
||
Rated output Current protection |
yes |
||
Temperature Protection |
yes |
||
Other Parameters |
|||
Noise |
≤40dB |
||
Thermal heat-dissipating method |
Itself cooling |
fan cooling |
|
Components |
Imported material, with EU standards. |
||
Certification |
CE\FCC\ROHS |
||
Physical |
|||
Measurement D x W x H(mm) |
205*168*60 |
||
package size D x W x H(mm) |
265*196*110 |
||
N.G(KG) |
1.8kg |
||
G.N(KG) |
2kg |
||
Type of Mechanical Protection |
IP25 |
||
Environment |
|||
Humidity |
0~90%RH ( no condense) |
||
Altitude |
0~3000m |
||
Operating Temperature |
-20℃ ~ +50℃ |
||
Storage Temperature |
-40℃ ~ +75℃ |
||
Atmospheric Pressure |
70~106kPa |
Tel:+86 15002089033
Contactpersoon:Wenshen Huang
PDF-show:Pdf