- Обзор категорий
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT Solar Smart Digital Controller
- RUNNER MPPT Solar Smart Digital Controller
- Серия GALAXY High Power
- Марс открытый сериал
- Солнечный контроллер MPPT серии ESMART
- Солнечный контроллер MPPT серии MASTER
- Аксессуары
- (Не выпускается) Контроллер солнечной энергии MPPT
- (Снят с производства) Инвертор серии SP
- (Был удален)
- (Снято с производства) Инвертор серии I-Panda SPC
- Сертификация
-
- Подписаться
-
Получайте обновления по электронной почте о новых продуктах
- Свяжитесь с нами
-
Тел: + 86-755-23091101 & + 86-755-23091100
Факс: + 86-755-23091102
Информация: info@ipandee.com.
Адрес: этаж 2, здание A2, Software Park Software, № 31, дорога Булана, улица Нанвань, район Лонган, Шэньчжэнь
Китай почтовый индекс: 518000 Связаться сейчас
- Подписывайтесь на нас
-
-
Почему пусковое напряжение инвертора выше минимального напряжения?
В инверторе, подключенном к фотоэлектрической сети, странным является один парам... -
Как решить проблему перенапряжения инвертора переменного тока?
в настоящее времяФотоэлектрическиеПроизводство электроэнергии по сети становит... -
Разница между улучшенной синусоидой и инвертором синусоидальной формы
Эта статья описывает разницу между улучшенной синусоидой и инвертором синусоида... -
Десятка ведущих мировых производителей фотоэлектрических инверторов
Инвертор также называют регулятором мощности. В соответствии с использованием ин... -
Почему инвертор должен перестать работать, когда сеть отключена?
Некоторые люди устанавливают фотоэлектрическую систему, у них возникает ментали... -
В чем разница между функцией MPPT и солнечным инвертором без функции MPPT?
Контроллер MPPT использует технологию отслеживания точки максимальной мощности, ч... -
Первый в Европе завод по переработке отходов фотоэлектрических панелей
Солнечные батареи имеют срок службы от 20 до 30 лет. Наряду с массовым производством... -
Ученые обнаружили, что песок может сделать кремниевые материалы для солнечных элементов
Согласно сообщению агентства новостей Kyodo от 6 ноября, приглашенные профессора Ун... -
Модель конкуренции на внутреннем рынке хранения энергии
Хранение энергии как новый рынок для многих производителей батарей в Китае иинве... -
Португалия достигнет 100% возобновляемых источников энергии в 2050 году
Министр окружающей среды и трансформации энергетики Португалии Жоау Педро Матуш ...
-
rua luz mppt controlador de carga solar com saída DC, dc 12v 24v 48v 30a mppt controlador de carga solar
- DC inpurt: trabalho de auto 12V/24V/48V DC
- Max. Charge atual: 30A
- Max.PV tensão de entrada: DC 100V
- Eficiência de conversão: Max.upto 99%
- Modo de carga: três fases de rápida charge(MPPT), tensão constante, a carga de flutuação
- Porta de comunicação RS 232
- Display LED
Introduction
This is a I-panda I-P-eSMART series MPPT (maximum Power Point Tracking) smart solar controller, with charging and discharging function, increasing 30%~60% efficiency than traditional PWM controller. It has automatic recognition function, three Stages charging function, also supports many kinds of battery charging and discharging, RS232 communication etc, It’s our company’s MPPT solar controller e-SMART series.
Features
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/48V battery system automatic recognition, users would like to use in different system conveniently.
3. DC12V/24V/48V system, maximum PV input voltage up to DC100V.
4. Charge type: three stages charge fast charge(MPPT), constant voltage,
floating charge, protected our battery, lead to a long use age.
5. Discharge type owns always on pattern and always off pattern, it also has PV voltage solar controlling switch pattern.
6. Clients can auto select any one in the 4 kinds of commonly used batteries, Sealed lead acid, vented, Gel, NiCd and custom other batteries.
7. Digital tube display controller battery voltage and charging current,upper computer display various parameters, such as model, PV input voltage, battery types, battery voltage, charging current, charging power, working condition etc.
8. RS232 communication, and that providing communication protocol, it’s convenient for customer’s integration management.
9. This controller could be paralleled infinitely.
10. CE, RoHS Certifications approved; cooperating with clients through the other certifications.
11. 2 years warranty; 3~10 years extended technical service.
Products photos
Parameters
MPPT solar controller modes: |
30A |
||
Charge mode |
MPPT(maximum power point tracking) |
||
Charge method |
Three stages: constant current(MPPT),constant voltage,floating charge |
||
System type |
DC12V/24V/48V |
Automatic recognition |
|
System voltage |
12V system |
DC9V~DC15V |
|
24V system |
DC18V~DC30V |
||
48V system |
DC36V~DC60V |
||
Soft start time |
12V/24V/48V system |
≤3S |
|
Dynamic response recovery and range |
12V/24V/48V system |
500us |
|
MPPT efficiency |
12V/24V/48V system |
≥96.5%,≤99% |
|
INPUT CHARACTERISTICS |
|||
MPPT working voltage and Range |
12V system |
DC14V~DC100V |
|
24V system |
DC30~DC100V |
||
48V system |
DC60~DC100V |
||
Low voltage input Protection point |
12V system |
DC14V |
|
24V system |
DC30V |
||
48V system |
DC60V |
||
Low voltage input Recovery point |
12V system |
DC18V |
|
24V system |
DC34V |
||
48V system |
DC65V |
||
Input over voltage protection point |
12V/24V/48V system |
DC110V |
|
Input over voltage recovery point |
12V/24V/48V system |
DC100V |
|
Maximum PV power |
12V system (W) |
426 |
|
24V system (W) |
852 |
||
48V system (W) |
1704 |
||
CHARGE CHRECTRESTICS |
|||
Selectable Battery Types (Default type is GEL battery) |
12V/24V/48V system |
Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined)) |
|
Constant Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Floating Charge Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Rated Input Current |
12V/24V/48V system |
30A |
|
Current-limiting Protection |
12V/24V/48V system |
35A |
|
Temperature Factor |
12V/24V/48V system |
±0.02%/℃ |
|
Temperature Compensation |
12V/24V/48V system |
14.2V-(The highest temperature-25℃)*0.3 |
|
Output Ripples(peak) |
12V/24V/48V system |
200mV |
|
Output Voltage Stability Precision |
12V/24V/48V system |
≤±1.5% |
|
Output Discharge Characteristics |
|||
Output voltage |
Base on battery voltage |
||
Low voltage output Protection point |
Default 10.5V; recovery 11V; custom available ; |
||
Rated output Current |
30A |
||
The output control |
Always on, always off, PV voltage control switch |
||
Output control set mode |
Controller button or upper computer |
||
Display |
|||
LED digital tube display |
Battery voltage, charge current |
||
LED light display |
Charging indicator light, LOAD indicator light |
||
PC(communication port) |
RS232 |
||
Protection |
|||
Input Low Voltage Protection |
Check the input characteristics |
||
Input Overvoltage Protection |
Check the input characteristics |
||
Charge over voltage power Protection |
yes |
||
Low Voltage output Protection |
yes |
||
Rated output Current protection |
yes |
||
Temperature Protection |
yes |
||
Other Parameters |
|||
Noise |
≤40dB |
||
Thermal heat-dissipating method |
Itself cooling |
fan cooling |
|
Components |
Imported material, with EU standards. |
||
Certification |
CE\FCC\ROHS |
||
Physical |
|||
Measurement D x W x H(mm) |
205*168*60 |
||
package size D x W x H(mm) |
265*196*110 |
||
N.G(KG) |
1.8kg |
||
G.N(KG) |
2kg |
||
Type of Mechanical Protection |
IP25 |
||
Environment |
|||
Humidity |
0~90%RH ( no condense) |
||
Altitude |
0~3000m |
||
Operating Temperature |
-20℃ ~ +50℃ |
||
Storage Temperature |
-40℃ ~ +75℃ |
||
Atmospheric Pressure |
70~106kPa |
Тел:+86 15002089033
Контактное лицо:wenshen huang
PDF Show:PDF.