- Обзор категорий
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT Solar Smart Digital Controller
- RUNNER MPPT Solar Smart Digital Controller
- Серия GALAXY High Power
- Марс открытый сериал
- Солнечный контроллер MPPT серии ESMART
- Солнечный контроллер MPPT серии MASTER
- Аксессуары
- (Не выпускается) Контроллер солнечной энергии MPPT
- (Снят с производства) Инвертор серии SP
- (Был удален)
- (Снято с производства) Инвертор серии I-Panda SPC
- Сертификация
-
- Подписаться
-
Получайте обновления по электронной почте о новых продуктах
- Свяжитесь с нами
-
Тел: + 86-755-23091101 & + 86-755-23091100
Факс: + 86-755-23091102
Информация: info@ipandee.com.
Адрес: этаж 2, здание A2, Software Park Software, № 31, дорога Булана, улица Нанвань, район Лонган, Шэньчжэнь
Китай почтовый индекс: 518000 Связаться сейчас
- Подписывайтесь на нас
-
-
Почему пусковое напряжение инвертора выше минимального напряжения?
В инверторе, подключенном к фотоэлектрической сети, странным является один парам... -
Как решить проблему перенапряжения инвертора переменного тока?
в настоящее времяФотоэлектрическиеПроизводство электроэнергии по сети становит... -
Разница между улучшенной синусоидой и инвертором синусоидальной формы
Эта статья описывает разницу между улучшенной синусоидой и инвертором синусоида... -
Десятка ведущих мировых производителей фотоэлектрических инверторов
Инвертор также называют регулятором мощности. В соответствии с использованием ин... -
Почему инвертор должен перестать работать, когда сеть отключена?
Некоторые люди устанавливают фотоэлектрическую систему, у них возникает ментали... -
В чем разница между функцией MPPT и солнечным инвертором без функции MPPT?
Контроллер MPPT использует технологию отслеживания точки максимальной мощности, ч... -
Первый в Европе завод по переработке отходов фотоэлектрических панелей
Солнечные батареи имеют срок службы от 20 до 30 лет. Наряду с массовым производством... -
Ученые обнаружили, что песок может сделать кремниевые материалы для солнечных элементов
Согласно сообщению агентства новостей Kyodo от 6 ноября, приглашенные профессора Ун... -
Модель конкуренции на внутреннем рынке хранения энергии
Хранение энергии как новый рынок для многих производителей батарей в Китае иинве... -
Португалия достигнет 100% возобновляемых источников энергии в 2050 году
Министр окружающей среды и трансформации энергетики Португалии Жоау Педро Матуш ...
-
ipanda постоянного тока для питания инвертора Чистая синусоида инвертор со встроенным MPPT солнечной контроллера заряда
- связанной выходная мощность: 1000W, 1500W, 2000W, 3000W, 4000W, 5000W.
- пиковая мощность: двойной
- напряжение батареи: 12В / 24В / 48В (опция)
- выходное напряжение: 220V ± 3% или 230 ± 3 или 240 ± 3% или 100V ± 3% или 110 ± 3% (опция)
- встроенный MPPT солнечной контроллера заряда
- напряжение: 12 В постоянного тока / 24В / 48В авто работа;
- ток: 15A, 20A, 25A, 30A, 40A (опция);
- max.PV входное напряжение: 100V;
- Эффективность PV заряд: до 99%;
- max.PV входная мощность: 568W ~ 2272W.
Introduction
This series of product is a module design of inverter and built-in MPPT controller, which has the advantages of high conversion efficiency, low power consumption and strong load-carrying ability. With intelligent control, customers can set charging mode, (Utility as complementary power) AC first mode or DC first mode, timed inversion mode and timed utility mode, timed on/off sleep mode. This is the currently the most advanced inverter & controller hybrid in the world.
Application
1. Off-grid solar power system
2. Solar power system with utility as complementary power
Feature
1. Easy to install. To configure a solar system, customers only need to connect it with solar panels and batteries;
2. CPU management ,intelligent control,modular design, User-friendly LCD display;
3. Built-in MPPT controller, high charging efficiency ( 95%~99%);
4. Low power consumption, high conversion efficiency(85%~92%);
5. Intellectual,multi-function, convenient for customers with different using environment to fully use the solar energy;
6. External battery connection, convenient to expand back-up power time;
7. Strong load-carrying ability, low failure rate, easy maintenance and long service life (under proper operation, it may be as long as 5 years);
8. Perfect protection: low voltage protection, over voltage protection, overheat protection, short-circuit protection, overloads protection;
9. CE / EMC / LVD/ RoHS Approvals;
10. Two years warranty, life-long technical supports.
Function
1. Charging function
1.1 PV charge the battery, utility will not: when PV and utility are both connected to the machine, only the PV will charge the battery when there is sunlight
1.2 Both PV and utility will charge the battery: when PV and utility are both connected to the machine, AC (utility) will charge the battery. In the meanwhile, PV will also charge the battery if there is sunlight.
2. Utility as complementary power function
2.1 AC first , DC standby UPS mode
When both utility and battery are connected to the machine, utility will supply power to the loads prior to the battery. When utility is cut off, the battery will automatically continue to supply power.
2.2 DC first, AC standby UPS mode
When both utility and battery are connected to the inverter, battery will supply power to the loads prior to utility. When battery capacity is not enough, utility will continue to supply power automatically.
3. Timing function
3.1 Timed on/off normal working mode and sleep mode: can set specific time when to open normal output and when to close AC output to enter sleep mode.
3.2 Battery and utility switchable mode: can set specific time when to use battery or utility supply power (suitable for areas where electric fee is charged according to period in different intervals).
4. Recording/checking function
4.1 Machine fault checking: can check the machine fault information.
4.2 Discharge time checking: can check the discharge time of the battery.
Parameter
Parameter Model |
1000W |
1500W |
2000W |
3000W |
4000W |
5000W |
|||||||||||
Rated Output Power |
1000W |
1500W |
2000W |
3000W |
4000W |
5000W |
|||||||||||
Peak Power |
2000W |
3000W |
4000W |
6000W |
8000W |
10000W |
|||||||||||
Battery (Lead-acid battery) |
24V |
24V/48V(optional) |
48V |
||||||||||||||
Charging Parameter |
|||||||||||||||||
Charge Mode(setting) |
PV charge |
||||||||||||||||
PV charge + utility charge |
|||||||||||||||||
MPPT Solar Controller |
Voltage |
24V |
24V/48V |
48V |
|||||||||||||
Current |
20A |
25A |
30A |
40A |
40A |
40A |
|||||||||||
Max PV Input Voltage |
100V |
||||||||||||||||
PV Charge Efficiency |
95%~99% |
||||||||||||||||
Max PV Input Power |
568W |
24V: 710W |
24V: 852W |
24V:1136W |
2272W |
2272W |
|||||||||||
48V1420W |
48V: 1704W |
48V: 2272W |
|||||||||||||||
Utility |
AC Charge Current |
0~15A |
|||||||||||||||
Charge Mode |
3-Stage Charging |
||||||||||||||||
Inversion parameter |
|||||||||||||||||
AC Output |
Voltage |
220V±3% or 230V±3 or 240V±3% or 100V±3% |
|||||||||||||||
Frequency |
50Hz±0.5 or 60Hz±0.5 (optional) |
||||||||||||||||
Output wave type |
Pure sine wave output, waveform distortion rate≤3 |
||||||||||||||||
Overload ability |
>120% 1 min, >130% 10s |
||||||||||||||||
Power Consumption (under normal working mode) |
0.4A |
24V: 0.5A |
24V: 0.7A |
24V: 0.7A |
0.6A |
0.65A |
|||||||||||
48V: 0.4A |
48V: 0.45A |
48V: 0.5A |
|||||||||||||||
Power Consumption (under sleep mode) |
1-6W |
||||||||||||||||
Inverter Conversion Efficiency |
85%~92% |
||||||||||||||||
Utility Mode |
|||||||||||||||||
AC Input |
Voltage |
220V±35% or 110V+35%(optional) |
|||||||||||||||
Frequency |
The same as utility |
||||||||||||||||
AC Output |
Voltage |
220V±5% or 110V+5%(optional) |
|||||||||||||||
Frequency |
The same as utility |
||||||||||||||||
Overload Ability |
>120% 1 min,>130% 10s |
||||||||||||||||
(AC first or DC first) priority |
|||||||||||||||||
UPS Output(setting) |
AC first, DC standby |
||||||||||||||||
DC first, AC standby |
|||||||||||||||||
Switch Time |
<5ms (AC to DC / DC to AC) |
||||||||||||||||
Power On |
Set by users |
||||||||||||||||
Timed open / close AC output automatically |
|||||||||||||||||
General Parameter |
|||||||||||||||||
Display |
Display Mode |
LCD+LED |
|||||||||||||||
Display Information |
Input voltage, output voltage, output frequency, battery capacity, Load condition, Status Information |
||||||||||||||||
Protection |
Overload output, short-circuit, high-voltage input, low-voltage input, overheat |
||||||||||||||||
Environment
|
Temperature |
-10℃~50℃ |
|||||||||||||||
humidity |
10%~90% |
||||||||||||||||
Altitude |
≤4000m |
||||||||||||||||
Size W×D×H(mm) |
438*208*413 |
450*246*468 |
|||||||||||||||
Packing Size W×D×H(mm) |
520*310*460 |
540*300*518 |
|||||||||||||||
Net Weight (kg) |
15 |
17 |
19 |
25 |
34 |
35 |
|||||||||||
Gross Weight (kg) |
16 |
18 |
20 |
27 |
40 |
41 |
|||||||||||
Products photo
Company photo
Тел:+86 15002089033
Контактное лицо:wenshen huang
PDF Show:PDF.