Обзор категорий
EMMPT48 series MPPT solar charge controller
The Explorer-NS series MPPT solar charge controlle
MPPT solar charge controller eSmart4
EXPLORER-M MPPT Solar Smart Digital Controller
EXPLORER MPPT Solar Smart Digital Controller
RUNNER MPPT Solar Smart Digital Controller
Серия GALAXY High Power
Марс открытый сериал
Солнечный контроллер MPPT серии ESMART
Солнечный контроллер MPPT серии MASTER
Аксессуары
(Не выпускается) Контроллер солнечной энергии MPPT
(Снят с производства) Инвертор серии SP
(Был удален)
(Снято с производства) Инвертор серии I-Panda SPC
Сертификация
Свяжитесь с нами
Тел: + 86-755-23091101 & + 86-755-23091100  
Факс: + 86-755-23091102   
Информация: info@ipandee.com.
Адрес: этаж 2, здание A2, Software Park Software, № 31, дорога Булана, улица Нанвань, район Лонган, Шэньчжэнь
Китай почтовый индекс: 518000
Связаться сейчас
Подписывайтесь на нас
Твоя позиция: Дом > Категория > (Снято с производства) Инвертор серии I-Panda SPC > Pure sine wave power inverter China, China factory DC AC Power, pure sine wave DC to AC 350w
Pure sine wave power inverter China, China factory DC AC Power, pure sine wave DC to AC 350wPure sine wave power inverter China, China factory DC AC Power, pure sine wave DC to AC 350wPure sine wave power inverter China, China factory DC AC Power, pure sine wave DC to AC 350w

Pure sine wave power inverter China, China factory DC AC Power, pure sine wave DC to AC 350w

  • Strong overload ability
  • Low frequency Design
  • DC first /AC first
  • Sleep Function
  • Charge Function
  • DC to AC Funiction
  • UPS Function
  • Output wave form:Pure sine wave
  • Material:Metal
  • Display:LCD and LED
  • controller built-in: yes
  • modul structure: Yes

Features

1) Easy to install. Toconfigure a solar system, users just need to connect it with solar panels andbatteries.

2)CPU management,Intelligentcontrol,modular design

3)LEDs LCD display. LCDcan display various parameters(such as the output voltage, frequency, workingmode)

4)Multifunction design,AVR UPS function. Users don’t need to buy solar, controller, AC charger or stabilizer.

5)External battery connection, it’s convenient for users to expand use time andback-up power time

6)With superload-carrying ability and high load capacity, this series of  inverters can not only drive resistance load;but also various kinds of inductive loads such as motor, air conditioner,electric drills, fluorescent lamp, gas lamp. It can drive almost any kinds ofload

7)Low frequency pure sine wave circuit design, stable quality, easy to maintenance, low failure rate and long service life (under proper operation, it can last at least 5 years)

8) Perfect protection: lowvoltage protection, high voltage protection, over temperature protection, short-circuitprotection, overload protection

9) CE / EMC / LVD/ RoHS/FCC approvals

10) 2 years warranty, life-long technical support

Function

1.   Sole inversion function under inversion mode(only connected to battery),can be set to normal working mode and sleep mode



1.1  Normal working mode:FREQUENCY in the LCD display is set as 01. No matter whether there are AC loads connected to the inverter or not, the inverter’s output terminal will always have voltage ready to supply power to the loads. Under this mode, the LCD will be displayed as bellow:

                       


1.2  Sleep mode:FREQUNCY in the LCD display is set as 02.If the power of the connected AC loads is lower than 5% of the inverter’s rated power, there will be no output from the inverter. Only the chip of inverter is working. The power consumption of the inverter is only 1-6W. The LCD shows the output voltage 0. If the power of the connected loads is over 5%,then the inverter will automatically convert DC to AC to supply power for the loads within 5s. The LCD shows the output voltage. As shown below:





System introduction under this mode:

1) Only the solar panel charges the battery

2) Independent sole off-grid solar power system; suitable for areas that are      lack of utility or have rich solar energy




2. UPS function When the inverter is connected tobattery and utility, users can set it to utility first (AC first) batterystandby mode or battery first (DC first)utility standby mode.

2.1.Utilityfirst (AC first) battery standby mode : FREQUENCY in the LCD display is set to 01.When utility and battery are connected to the inverter, utility will supplypower to the loads prior. When utility is cut off, the battery willautomatically continue to supply power via power inverter.

   Steps are as follows:

   Step 1: When utility is available, it will drivethe loads directly after voltage being stabilized and at the same time chargebatteries via power inverter .

   Step 2: When utility is cut off, theinverter will convert DC to AC automatically to ensure uninterrupted powersupply within 5ms.

   Step 3: When utility is available again,inverter will automatically transfer to utility supplying power to loads andcharge batteries via power inverter at the same time.


See Workflow as below:




LCD displayed as bellow:




Kindly note:

1) There are 2 ways to charge the battery, utility and solar panel

2) This system is suitable for power systems built in areas that are lack of utility. Or people can use solar and utility at the same time.

2.2. Battery first (DC first)utility standy mode: FREQUENCY in the LCD display is set as 03. When utility and battery are connected to the inverter, battery will supply power to the loads prior to utility. When battery capacity is not enough, utility will continue to supply power automatically.

Steps are as follows:

Step 1: When battery is available, it will drive the AC loads via power inverter.

Step 2: When battery does not have enough power, it will automatically transfer to utility supplying power to the loads

Step 3: After the battery is fully charged (e.g. by solar or wind charge controller), it will automatically transfer to battery supplying power to the loads via power inverter.



See Workflow as below:




LCD displayed as bellow:




System introduction under this mode:

1) There is only way to charge the battery: solar panel

2) This system is suitable for areas where electricity is expensive and environmental areas where solar power can be fully used to save utiliypower, such as family solar&wind system and streetlight solar&wind system


Parameter

                     Mode         

500VA

Rated Output Capacity

350W

Peak Power

700W

Battery Voltage(DC)

12V or 24V

PWM Solar Controller

Voltage

12V or 24V

Current

10A

PV Max Input Voltage

12V System:25V

24V System:50V

Size W×D×H(mm)

335*165*375

Packing Size W×D×H(mm)

355*185*395

Net Weight (kg)

7

Gross Weight (kg)

8

General Parameter

Working Mode (Setting)

1

Utility first (AC first) battery standby mode

2

Sleep Mode,no utility,load’s power is over 5% of rated output power, Inverter start to work automatically

3

Battery first (DC first)utility standby mode

AC Input

Voltage

220V±35% or 110V+35%(Optional)

Frequency

50Hz±3% or 60Hz±3% (Optional)

AC Output

Voltage

220V±3% or 230V±3 or240V±3% or 100V±3% or 110V±3% (Optional)

Frequency

50Hz±0.5 or 60Hz±0.5 (Optional)

Utility charge

AC Charge Current

0~15A

Charge Time

Depend on battery capacity and quantity

Battery Protection

Automatic detection, Charge and discharge protection,Intelligent Management

PV Charge

Total Current of PV Input Should Be Less Than Rated Current of PWM solar controller

Display

Display Mode

LCD+LED

Display Information

Input voltage,output voltage,output frequency,battery capacity,Load condition,Status Information

Output Wave Type

Pure sine wave output,Total Harmonic Distortion THD≤3

Overload Ability

>120% 1 min,>130% 10s

Power Consumption

Sleep Mode

1~6W

Normal Mode

1~3A

Conversion Efficiency

80%~90%

Transfer Time

<5ms (AC to DC / DC to AC)

Protection

Overload output,short-circuit,high-voltage input,low-voltage input,overheat

Environment

Temperature

-10℃~50℃

Humidity

10%~90%

Altitude

≤4000m


  • The above parameters with “or” means that the parameter needs to do factory settings as per customer’s preference.
  • We have our own professional inverter controller and UPS R&D team and we provide technical support and OEM service.
  • The controller information above is our company’s standard parameter can be changed according to customer’s requirement.


Connection Diagram




Others

Please refer to the outline design, technical documents, product brochures, etc.

Made by Engineering Department, May 5, 2014, 1st Edition



Shenzhen ipandee New Energy Technology & Science Co., Ltd

Тел:+86-15002089033

Контактное лицо:Zoe

PDF Show:PDF.

Отправить запрос
captcha
https://kefu5.cckefucloud.com/vclient/chat/?websiteid=p9rjd9g58z6e70x5e6vpx31vpm2kwyb4&wc=39157e7a&clerkid=906266