I-Panda eSMART Series Portable MPPT Solar Charge Controller with DC Load, RS232 Communication Port, Free PC Software

Browse Categories

Accessories

（out of product）WISER series MPPT solar controller

（out of production）Inverter SP Series 350W-20000W

(Has been removed)

（out of production）I-Panda SPC Series Inverter

Certifications

Hot Products: Ipandee new generation MPPT controller Runner -RS

I-Panda new MPPT solar controller explorer 50A / 60A

eSmart4 series MPPT solar charge controller

I-Panda 80A 12V / 24V / 36V / 48V Outdoor Waterproof IP67 High Power MPPT Solar Charge Controller

EMMPT48 series MPPT solar charge controller

The Explorer-NS series MPPT solar charge controller

I-Panda new model high end high power off-grid system mppt solar controller 50A&60A

Contact Us: Tel: + 86-755-23091101&+86-755-23091100
Fax: + 86-755-23091102
Information: info@ipandee.com
address: Floor 2, building A2, LiLang Software Park, No. 31, Bulan Road, Nanwan street, Longgang District, Shenzhen
China Post code: 518000

Contact Now

Follow us

News

Why is the inverter starting voltage higher than the minimum voltage?

In the photovoltaic grid-connected inverter, one parameter is strange, that is, the inverter input starting voltage. This voltage is about 30V higher ...
How to solve the AC inverter overvoltage problem?

just nowPhotovoltaicOn-grid power generation is becoming more and more popular, and ordinary people's homes can see PV power plants in real time. Howe...
The world's top ten PV inverter companies

The inverter is also called the power regulator. According to the use of the inverter in the photovoltaic power generation system, it can be divided i...
Why should the inverter stop working when the grid is out of power?

Some people install a photovoltaic system, they will have a mentality of "even if the power grid is cut off, if there is a sun, and their homes can us...
Europe's first waste photovoltaic panel recycling plant

Solar panels have a service life of 20 to 30 years. Along with the mass production of the global solar energy manufacturing industry in the past few y...
Portugal will achieve 100% renewable energy supply in 2050

Portugal's Minister of Environment and Energy Transformation João Pedro Matos Fernandes revealed that Portugal will achieve its carbon neutrality tar...
Solar stocks are affected by the US stock market crash

The US stock market in December is not very good. The US stock market has experienced ups and downs, and the solar panels are not so bad. With continu...
Delingha 50MW Photothermal Demonstration Project Put into Operation

In October last year, it was learned from the Shenzhen Headquarters of China National Nuclear Power Corporation (CGN) that China’s first large-scale ...
Domestic energy storage market competition pattern

Energy storage as a new market for many battery manufacturers in China andInverterVendors bring the opportunity to expand new affairs and change the p...
What is the difference between MPPT function and solar inverter without MPPT function?

The MPPT controller utilizes maximum power point tracking technology to extract the maximum power from the solar array to charge the battery. The maxi...

Your position: Home > Category > (Has been removed) > e-SMART Solar Controller (Stop) > I-Panda Portable MPPT Solar Charge Controller RS232 Communication

I-Panda Portable MPPT Solar Charge Controller RS232 Communication

1.High conversion efficiency maximum 99%;
2.12v/24v/48v system auto recognition;
3.Support all kinds of battery;
4.Fast charge/Constant charge/Floating charge 3stage charge the batteries;
5.With DC output;
6.RS232 Communication port.

Introduction

This is a MPPT (maximum Power Point Tracking) smart solar controller, with charging and discharging function, increasing 30%~60% efficiency than traditional PWM controller. It has automatic recognition function, three Stages charging function, also supports many kinds of battery charging and discharging, RS232 communication etc, It’s our company’s MPPT solar controller e-SMART series.

Remarks:DC12V/24V/48V battery system automatic recognised

Features：

1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.

2. DC12V/24V/48V battery system automatic recognition, users would like to use in different system conveniently.

3. DC12V/24V/48V system, maximum PV input voltage up to DC100V.

4. Charge type: three stages charge fast charge(MPPT), constant voltage,

floating charge, protected our battery, lead to a long use age.

5. Discharge type owns always on pattern and always off pattern, it also has PV voltage solar controlling switch pattern.

6. Clients can auto choose any one in the 4 kinds of commonly used batteries, Sealed lead acid, vented, Gel, NiCd and custom other batteries.

7. Digital tube display controller battery voltage and charging current,upper computer display various parameters, such as model, PV input voltage, battery types, battery voltage, charging current, charging power, working condition etc.

8. RS232 communication, and that providing communication protocol, it’s convenient for customer’s integration management.

9. This controller could be paralleled infinitely.

10. CE, RoHS Certifications approved; cooperating with clients through the other certifications.

11. 2 years warranty; 3~10 years extended technical service.

Parameters:

MPPT solar controller modes： I-P-e-SMART-12V/24V/48V-series		40A
Charge mode	MPPT(maximum power point tracking)
Charge method	Three stages: constant current(MPPT),constant voltage,floating charge
System type	DC12V/24V/48V	Automatic recognition
System voltage	12V system	DC9V~DC15V
	24V system	DC18V~DC30V
	48V system	DC36V~DC60V
Soft start time	12V/24V/48V system	≤3S
Dynamic response recovery and range	12V/24V/48V system	500us
MPPT efficiency	12V/24V/48V system	≥96.5%,≤99%
INPUT CHARACTERISTICS
MPPT working voltage and Range	12V system	DC14V~DC100V
	24V system	DC30~DC100V
	48V system	DC60~DC100V
Low voltage input Protection point	12V system	DC14V
	24V system	DC30V
	48V system	DC60V
Low voltage input Recovery point	12V system	DC18V
	24V system	DC34V
	48V system	DC65V
Input over voltage protection point	12V/24V/48V system	DC110V
Input over voltage recovery point	12V/24V/48V system	DC100V
Maximum PV power	12V system (W)	568
	24V system (W)	1136
	48V system (W)	2272
CHARGE CHRECTRESTICS
Selectable Battery Types (Default type is GEL battery)	12V/24V/48V system	Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined)）
Constant Voltage	12V/24V/48V system	Please check the charge voltage according to the battery type form.
Floating Charge Voltage	12V/24V/48V system	Please check the charge voltage according to the battery type form.
Rated Input Current	12V/24V/48V system	40A
Current-limiting Protection	12V/24V/48V system	45A
Temperature Factor	12V/24V/48V system	±0.02%/℃
Temperature Compensation	12V/24V/48V system	14.2V-(The highest temperature-25℃)*0.3
Output Ripples(peak)	12V/24V/48V system	200mV
Output Voltage Stability Precision	12V/24V/48V system	≤±1.5%
Output Discharge Characteristics
Output voltage		Base on battery voltage
Low voltage output Protection point		Default 10.5V; recovery 11V; custom available ;
Rated output Current		30A
The output control		Always on, always off, PV voltage control switch
Output control set mode		Controller button or upper computer
Display
LED digital tube display		Battery voltage, charge current
LED light display		Charging indicator light, LOAD indicator light
PC（communication port）		RS232
Protection
Input Low Voltage Protection		Check the input characteristics
Input Overvoltage Protection		Check the input characteristics
Charge over voltage power Protection		yes
Low Voltage output Protection		yes
Rated output Current protection		yes
Temperature Protection		yes
Other Parameters
Noise		≤40dB
Thermal heat-dissipating method		Itself cooling	fan cooling
Components		Imported material, with EU standards.
Certification		CE\FCC\ROHS
Physical
Measurement D x W x H(mm)		20516860
package size D x W x H(mm)		265196110
N.G(KG)		1.8kg
G.N(KG)		2kg
Type of Mechanical Protection		IP25
Environment
Humidity		0~90%RH ( no condense)
Altitude		0~3000m
Operating Temperature		-20℃ ~ +50℃
Storage Temperature		-40℃ ~ +75℃
Atmospheric Pressure		70~106kPa

Remarks：
The specification is only for reference. Subject to change without prior notice
We provide OEM and ODM service. The 36V/72V/96V model also can be custom made for you.

Products Package：

Number	quantity	parets name
1	1 pc	Controller appearance(blue or green is optional，OEM is available also)
2	2 pc	hangers（Used in the controller hanging）
3	4 set	screw（Used for hanging ear lock in the controller）
4	1 pc	RS232 port
5	1 pc	Battery temperature sensing lines
6	2 pc	fuse（DC output）
7	1 pc	specification（manual）
8	1 pc	CD（Built-in upper software）

Controller upper software testing software display information and set parameters.
1.Upper software and test software display information and set parameters.

Graphical: upper software

Graphical: testing ware

1.1 show solar charge and discharge status, PV voltage, charge voltage, charge Current etc, and setting the type of the batteries, LOAD output control method.

1.2 Product standard upper software; testing software is not provided(Due to testing software need clients’ PC has software development platform, if clients have the requests, please apply to our company for taking)

Remarks: the PC software is offered freely by our company.

2. Information display and parameter setting.

e-Smart series

2.1 ENTER1 button: press left ENTER1 show 2 digital battery voltage（if it is charging, then shows 2 digital charge voltage), for example,the battery voltage or charge voltage is 13.5V, it shows13.

Press ENTER1 for a long time, you can set battery types; more informations please see the specification.

2.2 ENTER2 button: press right ENTER2 show 2 digital battery current（if it has n’t been charging, then display 00, if the charge current is 20.5A, then it shows 25; press ENTER2, you can set always on and aways off pattern, you can see more details in the specification.

Other detailed parameters

Please see the outline of the design, technical documents, product manuals etc.

Engineering department custom 2th version on May 5, 2014.