pure sine wave inverter China,inverter 3000w,power inverter 24v

Browse Categories: EMMPT48 series MPPT solar charge controller(1); The Explorer-NS series MPPT solar charge controlle(1); MPPT solar charge controller eSmart4(1); EXPLORER-M MPPT Solar Smart Digital Controller(15); EXPLORER MPPT Solar Smart Digital Controller(12); RUNNER MPPT Solar Smart Digital Controller(9); GALAXY high power series MPPT solar controller(12); MARS outdoor series MPPT solar controller(10); eSMART series MPPT solar controller(23); MASTER series MPPT solar controller(28); Accessories(3); （out of product）WISER series MPPT solar controller(12); （out of production）Inverter SP Series 350W-20000W(110); （out of production）I-Panda SPC Series Inverter(70); (Has been removed)(517); （out of product）WISER series MPPT solar controller(1); High frequency pure sine wave inverter (stop)(9); TPI2 HPC (stop)(72); e-SMART Solar Controller (Stop)(109); First Generation MPPT Controller（stop）(71); Second Generation MPPT Controller（stop）(119); TPI2 Inverter （stop）(27)

Certifications

Contact us: Tel: + 86-755-23091101&+86-755-23091100
Fax: + 86-755-23091102
Information: info@ipandee.com
address: Floor 2, building A2, LiLang Software Park, No. 31, Bulan Road, Nanwan street, Longgang District, Shenzhen
China Post code: 518000
Contact Now

Home > Products > (Has been removed) > China manufacturer providing i.....

Products

China manufacturer providing intelligent AVR pure sine wave power inverter 24v 3000w & profressional OEM & ODM

China manufacturer providing intelligent AVR pure sine wave power inverter 24v 3000w & profressional OEM & ODM

Place of Origin: Shenzhen China (Mainland)
Brand Name: I-Panda
Model Number: I-P-HPC-3000W
Type: DC / AC Inverters
Technology: CPU control
Output Power: 3000w
Output Type: Pure Sine Wave form
DC Input Voltage: 24 / 48V
AC Input Voltage: 100/110/220/230 / 240V
Output Voltage: 100/110/220/230 / 240V

China manufacturer providing intelligent AVR pure sine wave power inverter 24v 3000w & amp; profressional OEM & amp; ODM

Introduction

Pure sine wave inverter with built-in MPPT controller IP-HPC-Series is a module design. It has the advantages of high conversion efficiency, low power consumption and strong load-carrying ability. With intelligent control, users can set charging mode, ( Utility as complementary power) AC first mode or DC first mode, timing inversion mode and timing utility mode, on / off mode It is one of advanced hybrid inverter & amp;. controller in the world.

Application

1.Off-grid solar power system
2.Solar and utility complementary power system

Feature

1.Easy to install.To configure a solar system, users just need to connect it with solar panels and batteries
2.CPU management, intelligent control, modular design, LCD display
3.Built-in MPPT controller, high charging efficiency
4.Low power consumption, high conversion efficiency
5.Intellectual, multi-function, it's convenient for users to make full use of solar energy in different situation
6. External battery connection, it's convenient for users to expand back-up power time
7.Strong load-carrying ability, low failure rate, easy to maintenance and long service life (under proper operation, it can last at least 5 years)
8.Perfect protection: low voltage protection, high voltage protection, over temperature protection, short-circuit protection, overload protection
9.CE / EMC / LVD / RoHS Approvals
10.Two years warranty, life-long technical support

Function
1.Charging function
1.1 PV only mode: when PV and utility are both connected to the inverter, only the PV will charge the battery while utility will not charge the battery.
1.2 PV + AC hybrid mode: when PV and utility are both connected to the inverter, both PV and utility will charge the battery.

2.Utility as complementary power UPS function
2.1AC first, DC standby UPS mode

When utility and battery are connected to the inverter, utility will supply power to the loads preferentially. When utility is cut off, the battery will automatically continue to supply power to the loads.

Steps are as follows:
Step 1: When utility power is available, it will drive the loads directly after voltage being stabilized and charge batteries at the same time.
Step 2: When utility power is cut off suddenly, the inverter will convert DC to AC automatically to ensure uninterrupted power supply within 5ms.
Step 3: When utility power is available again, it will automatically transfer to utility supplying power to loads and charge batteries at the same time.

2.2DC first, AC standby UPS mode:

When utility and battery are connected to the inverter, battery will supply power to the loads prior to utility. When battery capacity is not enough, utility will continue to supply power automatically.

Steps are as follows:
Step 1: When battery has enough power, it will drive the loads directly via power inverter
Step 2: When battery does not have enough power, it will automatically transfer to utility supplying power to the loads
Step 3: After the battery is fully charged (eg by solar or wind charge controller), it will automatically transfer to battery supplying power to the loads.

3.Timing function

3.1 On / Off mode: Users can set specific time to turn on / off the output of the inverter.
3.2 Working mode: Battery or utility switchable mode Users can set specific time when to use battery or utility supplying power (suitable for areas where electric fee is charged differently in different period).

4.Recording / checking function

4.1 Inverter fault checking: Users can check the inverter fault information
4.2 Discharge time checking: Users can check the discharge time of the battery

Parameter

Parameter Model

1000W

1500W

2000W

3000W

4000W

5000W

Rated Output Power

1000W

1500W

2000W

3000W

4000W

5000W

Peak Power

2000W

3000W

4000W

6000W

8000W

10000W

Battery

(Lead-acid battery)

24V

24V / 48V (optional)

48V

Charging Parameter

Charge Mode (setting)

PV charge

PV charge + utility charge

MPPT Solar Controller

Voltage

24V

24V / 48V

48V

Current

20A

25A

30A

40A

Max PV Input Voltage

100V

PV Charge Efficiency

95% to 99%

Max PV Input Power

568W

24V: 710W

24V: 852W

24V: 1136W

2272W

48V1420W

48V: 1704W

48V: 2272W

Utility

AC Charge Current

0 ~ 15A

Charge Mode

3-Stage Charging

Inversion parameter

AC Output

Voltage

220V ± 3% or 230V ± 3 or 240V ± 3% or 100V ± 3%
or 110V ± 3% (optional)

Frequency

50Hz ± 0.5 or 60Hz ± 0.5 (optional)

Output wave type

Pure sine wave output, Total Harmonic Distortion THD≤3

Overload ability

& Gt; 120% 1 min, & gt; 130% 10s

Power Consumption

(Under normal working mode)

0.4A

24V: 0.5A

24V: 0.7A

0.6A

0.65A

48V: 0.4A

48V: 0.45A

48V: 0.5A

Power Consumption

(Under sleep mode)

1-6W

Inverter Conversion Efficiency

85% to 92%

Utility Mode

AC Input

Voltage

220V ± 35% or 110V + 35% (optional)

Frequency

The same as utility's frequency

AC Output

Voltage

220V ± 5% or 110V + 5% (optional)

Frequency

The same as utility's frequency

Overload Ability

& Gt; 120% 1 min, & gt; 130% 10s

(AC first or DC first) priority

UPS Output (setting)

AC first, DC standby

DC first, AC standby

Switch Time

& Lt; 5ms (AC to DC / DC to AC)

Power On
(Setting)

Set by users

Timed on / off AC output automatically

General Parameter

Display

Display Mode

LCD + LED

Display Information

Input voltage, output voltage, output frequency, battery capacity, load condition, status Information

Protection

Overload, short-circuit, high-voltage input, low-voltage input, overheat

Environment

Temperature

-10 ℃ ~ 50 ℃

humidity

10% to 90%

Altitude

≤4000m

Size W × D × H (mm)

438 * 208 * 413

450 * 246 * 468

Packing Size W × D × H (mm)

520 * 310 * 460

540 * 300 * 518

Net Weight (kg)

Gross Weight (kg)

Pictures

Tag:protect battery, AVR, off grid system, High Quality, residential, commercial, emergency inverter

Shenzhen ipandee New Energy Technology & Science Co., Ltd

Tel:+86-15002089033

Contact Person:Henry Feng