- カテゴリを閲覧する
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPTソーラースマートデジタルコントローラー
- RUNNER MPPTソーラースマートデジタルコントローラー
- GALAXYハイパワーシリーズ
- 火星屋外シリーズ
- eSMARTシリーズMPPTソーラーコントローラー
- MASTERシリーズMPPTソーラーコントローラー
- アクセサリー
- (製品外)WISERシリーズMPPTソーラーコントローラー
- (生産終了)インバータSPシリーズ350W-20000W
- (削除されました)
- (生産終了)I-PandaSPCシリーズインバーター
- 認証
-
- 申し込む
-
新製品の最新情報をメールで受け取る
- お問い合わせ
-
TEL:+ 86-755-23091101&+ 86-755-23091100.
ファックス:+ 86-755-23091102
情報:info@ipandee.com
住所:フロア2、Building A2、Lilang Software Park、No. 31、Bulan Road、Nanwan Street、Longgang District、Shenzhen
中国郵便番号:518000 今コンタクトしてください
- フォローする
-
-
インバータの起動電圧が最低電圧より高いのはなぜですか?
太陽光発電連系インバータにおいて、一つのパラメータ、すなわちインバータ入力起動電圧がおかしい。 この電圧は最低動作電圧よりも約30V高く、単相インバータ、... -
ACインバータの過電圧問題を解決するには?
今太陽光発電系統連系発電はますます普及してきており、普通の人々の家はリアルタイムで太陽光発電所を見ることができます。しかし、人々にとって太陽光発電の系... -
改良された正弦波と純粋な正弦波インバーターの違い
この記事では、改良された正弦波と純粋な正弦波インバータの違いについて説明します。 ModifiedSine Pure Wave:最も一般的な汎用インバータは、「補正された正... -
世界のトップ10 PVインバータ企業
インバータはパワーレギュレータとも呼ばれ、太陽光発電システムにおけるインバータの用途に応じて、独立電源と系統連系の2種類に分けられる。波形変調方式では... -
グリッドの電源が切れていると、なぜインバータは動作を停止するのでしょうか。
太陽光発電システムを設置する人もいますが、「電力網が遮断されていても、太陽がある場合は自宅で電力を使用することができます。」という考え方があります。太... -
MPPT機能を持たないMPPT機能とソーラーインバーターの違いは何ですか?
MPPTコントローラは最大電力点追跡技術を利用してソーラーアレイから最大電力を引き出し、バッテリを充電します。最大パワーポイントトラッキングモードは完全自... -
ヨーロッパ初の廃太陽電池パネルリサイクルプラント
ソーラーパネルの寿命は20年から30年です。ここ数年、数年後の世界の太陽エネルギー製造業の大量生産と共に、世界は太陽電池パネルの「使い捨て潮汐」の波を引き... -
科学者達は砂が太陽電池シリコン材料を作ることができることを発見しました
共同通信社の11月6日の報道によると、菅原ら東京大学の教授らは、アルジェリア科学技術大学と共同研究を開始し、砂漠の砂で太陽電池用シリコン材料を安価に製造... -
国内エネルギー貯蔵市場の競争パターン
中国および多くの電池メーカーの新市場としてのエネルギー貯蔵インバータ仕入先は、新しい業務を拡大し、元の業務の職業上の地位を変更する機会をもたらします。... -
ポルトガルは2050年に100%再生可能エネルギー供給を達成する
ポルトガルの環境エネルギー変換大臣JoãoPedro Matos Fernandesは、ポルトガルが2050年までにカーボンニュートラル目標を達成することを明らかにしました。つま...
-
と交流220V千ワット純粋な正弦波インバーターへのDC24V内蔵のMPPTソーラー充電コントローラ
- 関連出力電力:1000W
- ピークパワー:ダブル
- バッテリー電圧:12V / 24V/48V(オプション)
- 出力電圧:220V±3%または±230V3または240V±3%または100V±3%または110V±3%(オプション)
- 内蔵のMPPTソーラー充電コントローラ
- 電圧:DC24V
- 電流:20A
- max.PV入力電圧:100V;
- PVの充電効率:99%点で最大;
- max.PV入力電力:568W。
Introduction
This series of product is a module design of inverter and built-in MPPT controller, which has the advantages of high conversion efficiency, low power consumption and strong load-carrying ability. With intelligent control, customers can set charging mode, (Utility as complementary power) AC first mode or DC first mode, timed inversion mode and timed utility mode, timed on/off sleep mode. This is the currently the most advanced inverter & controller hybrid in the world.
Application
- Off-grid solar power system
- Solar power system with utility as complementary power
Feature
- Easy to install. To configure a solar system, customers only need to connect it with solar panels and batteries
- CPU management ,intelligent control,modular design, User-friendly LCD display
- Built-in MPPT controller, high charging efficiency
- Low power consumption, high conversion efficiency
- Intellectual,multi-function, convenient for customers with different using environment to fully use the solar energy
- External battery connection, convenient to expand back-up power time
- Strong load-carrying ability, low failure rate, easy maintenance and long service life (under proper operation, it may be as long as 5 years)
- Perfect protection: low voltage protection, over voltage protection, overheat protection, short-circuit protection, overloads protection
- CE / EMC / LVD/ RoHS Approvals
- Two years warranty, life-long technical supports.
Function
1.Charging function
1.1 PV charge the battery, utility will not: when PV and utility are both connected to the machine, only the PV will charge the battery when there is sunlight
1.2 Both PV and utility will charge the battery: when PV and utility are both connected to the machine, AC (utility) will charge the battery. In the meanwhile, PV will also charge the battery if there is sunlight.
2.Utility as complementary power function
2.1 AC first , DC standby UPS mode
When both utility and battery are connected to the machine, utility will supply power to the loads prior to the battery. When utility is cut off, the battery will automatically continue to supply power.
2.2 DC first, AC standby UPS mode
When both utility and battery are connected to the inverter, battery will supply power to the loads prior to utility. When battery capacity is not enough, utility will continue to supply power automatically.
3.Timing function
3.1 Timed on/off normal working mode and sleep mode: can set specific time when to open normal output and when to close AC output to enter sleep mode.
3.2 Battery and utility switchable mode: can set specific time when to use battery or utility supply power (suitable for areas where electric fee is charged according to period in different intervals).
4.Recording/checking function
4.1 Machine fault checking: can check the machine fault information.
4.2 Discharge time checking: can check the discharge time of the battery.
Parameter
Parameter Model |
1000W |
|||
Rated Output Power |
1000W |
|||
Peak Power |
2000W |
|||
Battery (Lead-acid battery) |
24V |
|||
Charging Parameter |
||||
Charge Mode(setting) |
PV charge |
|||
PV charge + utility charge |
||||
MPPT Solar Controller |
Voltage |
24V |
||
Current |
20A |
|||
Max PV Input Voltage |
100V |
|||
PV Charge Efficiency |
95%~99% |
|||
Max PV Input Power |
568W |
|||
Utility |
AC Charge Current |
0~15A |
||
Charge Mode |
3-Stage Charging |
|||
Inversion parameter |
||||
AC Output |
Voltage |
220V±3% or
230V±3 or 240V±3% or 100V±3% |
||
Frequency |
50Hz±0.5 or 60Hz±0.5 (optional) |
|||
Output wave type |
Pure sine wave output, waveform distortion rate≤3 |
|||
Overload ability |
>120% 1 min, >130% 10s |
|||
Power Consumption (under normal working mode) |
0.4A |
|||
Power Consumption (under sleep mode) |
1-6W |
|||
Inverter Conversion Efficiency |
85%~92% |
|||
Utility Mode |
||||
AC Input |
Voltage |
220V±35% or 110V+35%(optional) |
||
Frequency |
The same as utility |
|||
AC Output |
Voltage |
220V±5% or 110V+5%(optional) |
||
Frequency |
The same as utility |
|||
Overload Ability |
>120% 1 min,>130% 10s |
|||
(AC first or DC first) priority |
||||
UPS Output(setting) |
AC first, DC standby |
|||
DC first, AC standby |
||||
Switch Time |
<5ms (AC to DC / DC to AC) |
|||
Power On |
Set by users |
|||
Timed open / close AC output automatically |
||||
General Parameter |
||||
Display |
Display Mode |
LCD+LED |
||
Display Information |
Input voltage, output voltage, output frequency, battery capacity, Load condition, Status Information |
|||
Protection |
Overload output, short-circuit, high-voltage input, low-voltage input, overheat |
|||
Environment |
Temperature |
-10℃~50℃ |
||
humidity |
10%~90% |
|||
Altitude |
≤4000m |
|||
Size W×D×H(mm) |
438*208*413 |
|||
Packing Size W×D×H(mm) |
520*310*460 |
|||
Net Weight (kg) |
15 |
|||
Gross Weight (kg) |
16 |
Products photos