- Navegue categorias
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT Solar Smart Digital Controller
- RUNNER MPPT Solar Smart Digital Controller
- Série de alta potência GALAXY
- Série ao ar livre de Marte
- controlador solar MPPT série eSMART
- Controlador solar MPPT série MASTER
- Acessórios
- (Fora do produto) Controlador solar MPPT
- (Fora de produção) Inversor SP Series 350W-20000W
- (Foi removido)
- (Fora de produção) Inversor I-Panda SPC Series
- Certificações.
-
- Se inscrever
-
Receba atualizações por e-mail sobre novos produtos
- Contate-Nos
-
Tel: + 86-755-23091101 e + 86-755-23091100
Fax: + 86-755-23091102
Informação: info@ipandee.com.
Endereço: Piso 2, Construindo A2, Lilang Software Park, No. 31, Bulan Road, Nanwan Street, Distrito de Longgang, Shenzhen
China Código Postal: 518000 Contate agora
- Siga-nos
-
-
Por que a tensão de partida do inversor é maior que a tensão mínima?
No inversor conectado à rede fotovoltaica, um parâmetro é estranho, isto é, a tensão de partida da entrada do inversor. Esta tensão é maior do ... -
Como resolver o problema de sobretensão do inversor de corrente alternada?
AgoraFotovoltaicaE geração de energia está se tornando cada vez mais popular, as pessoas comuns em casa pode ver em tempo real a figura da usina PV... -
A diferença entre uma onda senoidal melhorada e um inversor de onda senoidal pura
Este artigo descreve a diferença entre uma onda senoidal melhorada e um inversor de onda senoidal pura. ModifiedSine Pure Wave: Os inversores de uso ... -
As dez maiores empresas de inversores fotovoltaicos do mundo
O regulador de potência do inversor também conhecida, de acordo com o sistema inversor fotovoltaico uso pode ser dividido em rede elétrica de alime... -
Por que o inversor deve parar de funcionar quando a rede estiver sem energia?
Algumas pessoas na instalação de sistemas fotovoltaicos, vai realizar uma espécie de "queda de energia, mesmo se houver sol, suas casas também tê... -
Qual é a diferença entre a função MPPT e o inversor solar sem a função MPPT?
O controlador MPPT utiliza tecnologia de rastreamento de ponto de potência máxima para extrair a potência máxima do painel solar para carregar a b... -
A primeira usina de reciclagem de painéis fotovoltaicos de resíduos da Europa
Os painéis solares têm uma vida útil de 20 a 30 anos. Com alguns anos atrás, depois de a produção em massa de fabricação solar global, um núm... -
Os cientistas descobriram que a areia pode fazer materiais de silício de células solares
De acordo com a do Japão Kyodo News informou em 6 de novembro, um professor visitante no lago de carpas mostram Universidade de Tóquio Chendeng pess... -
Padrão de competição de mercado de armazenamento doméstico de energia
Armazenamento de energia como um novo mercado para muitos fabricantes de baterias na China eInversorOs fornecedores trazem a oportunidade de expandir ... -
Portugal vai conseguir 100% de fornecimento de energia renovável em 2050
Ministro português do Meio Ambiente e Energia transformação Jo? OPedroMatos Fernandes revelou que Portugal 2050 ser carbono neutra e objetiva, isto...
-
mppt controlador de alta eficiência com bom preço, 12v 24v 48v auto trabalho 15a mppt controlador de carga solar
- DC inpurt: trabalho de auto 12V/24V/48V DC
- Max. Charge atual: 15A
- Max.PV tensão de entrada: DC 100V
- Eficiência de conversão: Max.upto 99%
- Modo de carga: três fases de rápida charge(MPPT), tensão constante, a carga de flutuação
- Porta de comunicação RS 232
Introduction
This is a I-panda I-P-eSMART series MPPT (maximum Power Point Tracking) smart solar controller, with charging and discharging function, increasing 30%~60% efficiency than traditional PWM controller. It has automatic recognition function, three Stages charging function, also supports many kinds of battery charging and discharging, RS232 communication etc, It’s our company’s MPPT solar controller e-SMART series.
Features
1. MPPT charging mode, Max. efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/48V battery system automatic recognition, users would like to use in different system conveniently.
3. DC12V/24V/48V system, maximum PV input voltage up to DC100V.
4. Charge type: three stages charge fast charge(MPPT), constant voltage,
floating charge, protected our battery, lead to a long use age.
5. Discharge type owns always on pattern and always off pattern, it also has PV voltage solar controlling switch pattern.
6. Clients can auto select any one in the 4 kinds of commonly used batteries, Sealed lead acid, vented, Gel, NiCd and custom other batteries.
7. Digital tube display controller battery voltage and charging current,upper computer display various parameters, such as model, PV input voltage, battery types, battery voltage, charging current, charging power, working condition etc.
8. RS232 communication, and that providing communication protocol, it’s convenient for customer’s integration management.
9. This controller could be paralleled infinitely.
10. CE, RoHS Certifications approved; cooperating with clients through the other certifications.
11. 2 years warranty; 3~10 years extended technical service.
Products photos
Parameters
MPPT solar controller modes: |
15A |
||
Charge mode |
MPPT(maximum power point tracking) |
||
Charge method |
Three stages: constant current(MPPT),constant voltage,floating charge |
||
System type |
DC12V/24V/48V |
Automatic recognition |
|
System voltage |
12V system |
DC9V~DC15V |
|
24V system |
DC18V~DC30V |
||
48V system |
DC36V~DC60V |
||
Soft start time |
12V/24V/48V system |
≤3S |
|
Dynamic response recovery and range |
12V/24V/48V system |
500us |
|
MPPT efficiency |
12V/24V/48V system |
≥96.5%,≤99% |
|
INPUT CHARACTERISTICS |
|||
MPPT working voltage and Range |
12V system |
DC14V~DC100V |
|
24V system |
DC30~DC100V |
||
48V system |
DC60~DC100V |
||
Low voltage input Protection point |
12V system |
DC14V |
|
24V system |
DC30V |
||
48V system |
DC60V |
||
Low voltage input Recovery point |
12V system |
DC18V |
|
24V system |
DC34V |
||
48V system |
DC65V |
||
Input over voltage protection point |
12V/24V/48V system |
DC110V |
|
Input over voltage recovery point |
12V/24V/48V system |
DC100V |
|
Maximum PV power |
12V system (W) |
216 |
|
24V system (W) |
426 |
||
48V system (W) |
852 |
||
CHARGE CHRECTRESTICS |
|||
Selectable Battery Types (Default type is GEL battery) |
12V/24V/48V system |
Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined)) |
|
Constant Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Floating Charge Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Rated Input Current |
12V/24V/48V system |
15A |
|
Current-limiting Protection |
12V/24V/48V system |
20A |
|
Temperature Factor |
12V/24V/48V system |
±0.02%/℃ |
|
Temperature Compensation |
12V/24V/48V system |
14.2V-(The highest temperature-25℃)*0.3 |
|
Output Ripples(peak) |
12V/24V/48V system |
200mV |
|
Output Voltage Stability Precision |
12V/24V/48V system |
≤±1.5% |
|
Output Discharge Characteristics |
|||
Output voltage |
Base on battery voltage |
||
Low voltage output Protection point |
Default 10.5V; recovery 11V; custom available ; |
||
Rated output Current |
30A |
||
The output control |
Always on, always off, PV voltage control switch |
||
Output control set mode |
Controller button or upper computer |
||
Display |
|||
LED digital tube display |
Battery voltage, charge current |
||
LED light display |
Charging indicator light, LOAD indicator light |
||
PC(communication port) |
RS232 |
||
Protection |
|||
Input Low Voltage Protection |
Check the input characteristics |
||
Input Overvoltage Protection |
Check the input characteristics |
||
Charge over voltage power Protection |
yes |
||
Low Voltage output Protection |
yes |
||
Rated output Current protection |
yes |
||
Temperature Protection |
yes |
||
Other Parameters |
|||
Noise |
≤40dB |
||
Thermal heat-dissipating method |
Itself cooling |
fan cooling |
|
Components |
Imported material, with EU standards. |
||
Certification |
CE\FCC\ROHS |
||
Physical |
|||
Measurement D x W x H(mm) |
205*168*60 |
||
package size D x W x H(mm) |
265*196*110 |
||
N.G(KG) |
1.8kg |
||
G.N(KG) |
2kg |
||
Type of Mechanical Protection |
IP25 |
||
Environment |
|||
Humidity |
0~90%RH ( no condense) |
||
Altitude |
0~3000m |
||
Operating Temperature |
-20℃ ~ +50℃ |
||
Storage Temperature |
-40℃ ~ +75℃ |
||
Atmospheric Pressure |
70~106kPa |
Tel.:+86 15002089033
Pessoa de contato:quando huang
Show de pdf.:Pdf.