Browse Categories
EMMPT48 series MPPT solar charge controller
The Explorer-NS series MPPT solar charge controlle
MPPT solar charge controller eSmart4
EXPLORER-M MPPT Solar Smart Digital Controller
EXPLORER MPPT Solar Smart Digital Controller
RUNNER MPPT Solar Smart Digital Controller
GALAXY high power series MPPT solar controller
MARS outdoor series MPPT solar controller
eSMART series MPPT solar controller
MASTER series MPPT solar controller
Accessories
(out of product)WISER series MPPT solar controller
(out of production)Inverter SP Series 350W-20000W
(Has been removed)
(out of production)I-Panda SPC Series Inverter
Certifications
Contact Us
Tel: + 86-755-23091101&+86-755-23091100  
Fax: + 86-755-23091102   
Information: info@ipandee.com
address: Floor 2, building A2, LiLang Software Park, No. 31, Bulan Road, Nanwan street, Longgang District, Shenzhen   
China Post code: 518000
Contact Now
Follow us
News
Your position: Home > Category > (out of production)I-Panda SPC Series Inverter > I-P-SPC Low Frequency Solar Power Inverter with Built-in Solar Charge Controller 500W
I-P-SPC Low Frequency Solar Power Inverter with Built-in Solar Charge Controller 500WI-P-SPC Low Frequency Solar Power Inverter with Built-in Solar Charge Controller 500W

I-P-SPC Low Frequency Solar Power Inverter with Built-in Solar Charge Controller 500W

  • I-P-SPC inverter has high conversion efficiency, low power consumption, super load-carrying ability, large charging current etc. Users can set output priority (AC first or DC first) .
  • Function
  • Battery charge Ups  AVR voltage regulator
  • Strong overload ability
  • Low frequency Design
  • DC first /AC first
  • Sleep Function
  • Charge Function
  • DC to AC Funiction
  • UPS Function
  • Output wave form:Pure sine wave
  • Material:Metal
  • Display:LCD and LED
  • controller built-in: yes
  • modul structure: Yes

I-P-SPC Series LowFrequency Solar Power Inverter with Built-in Solar ChargeController 500W

Component

1)Highquality low frequency pure sine wave inverter(with utility charge   

function and UPS function)

2)Built-in PWMsolar power charge controller

 Application

1)Off-grid solar power system

2) Utility and solar complementarypower generation system

Features

1) Easy to install. To configure a solarsystem, users just need to connect it with solar panels and batteries.

2)CPU management,Intelligent control,modulardesign

3)LEDs LCD display. LCD can display variousparameters(such as the output voltage, frequency, working mode)

4)Multifunction design, AVR UPS function.Users don’t need to buy solar, controller, AC charger or stabilizer.

5) Externalbattery connection, it’s convenient for users to expand use time and back-uppower time

6)With super load-carrying ability and highload capacity, this series of  inverterscan not only drive resistance load; but also various kinds of inductive loads suchas motor, air conditioner, electric drills, fluorescent lamp, gas lamp. It candrive almost any kinds of load

7)Low frequency pure sine wave circuitdesign, stable quality, easy to maintenance, low failure rate and long servicelife (under proper operation, it can last at least 5 years)

8) Perfect protection: low voltageprotection, high voltage protection, over temperature protection, short-circuitprotection, overload protection

9) CE / EMC / LVD/ RoHS /FCC approvals

10) 2 years warranty, life-long technical support

Function

Off-grid solar power system

1.   When connected withbattery and AC loads,users can set it to normal working mode or sleep mode. 

1.1 Normal working mode:FREQUENCY in the LCD display is set to 01. No matter it’s connected AC loads or not, theinverter always convert DC to AC.  It’sready to supply power to the AC loads. In this mode, the LCD will displayoutput voltage as bellow:

 

1.2 Sleep mode:FREQUNCYin the LCD display is set as 02.If the power of the connected AC loads is lowerthan 5% of the inverter’s rated power, there will be no output from theinverter. Only the chip of inverter is working. The power consumption of theinverter is only 1-6W. The LCD shows the output voltage 0. If the power of theconnected loads is over 5%,then the inverter will automatically convert DC toAC to supply power for the loads within 5s. The LCD shows the output voltage.As shown below:

 

Kindly note:

1) Only the solar panel charges thebattery

2) Off-grid solar power system. It issuitable for areas that are lack of utility or plentiful solar

 Utility andsolar complementary power generation system

 

2. UPS function  When the inverter is connected to battery andutility, users can set it to utility first (AC first) battery standby mode orbattery first (DC first)utility standby mode.

2.1.Utilityfirst (AC first) battery standby mode : FREQUENCY in the LCD display is set to 01.When utility and battery are connected to the inverter, utility will supplypower to the loads prior. When utility is cut off, the battery willautomatically continue to supply power via power inverter.

   Stepsare as follows:

   Step1: When utility is available, it will drive the loads directly after voltagebeing stabilized and at the same time charge batteries via power inverter .

   Step2: When utility is cut off, the inverter will convert DC to AC automatically toensure uninterrupted power supply within 5ms.

   Step3: When utility is available again, inverter will automatically transfer toutility supplying power to loads and charge batteries via power inverter at thesame time.

See Workflowas below.

 

LCDdisplayed as bellow:

 

                                              Utility supplypower and charge battery                         Withoututility and battery supply power

Kindly note:

1) There are 2 ways to charge thebattery, utility and solar panel

2) This system is suitable for powersystems built in areas that are lack of utility. Or people can use solar andutility at the same time.

2.2. Batteryfirst (DC first)utility standy mode: FREQUENCY in the LCD display is set as 03. When utility andbattery are connected to the inverter, battery will supply power to the loadsprior to utility. When battery capacity is not enough, utility will continue tosupply power automatically.

Steps are as follows:

Step1: When battery is available, it will drive the AC loads via power inverter.

Step2: When battery does not have enough power, it will automatically transfer toutility supplying power to the loads

Step3: After the battery is fully charged (e.g. by solar or wind chargecontroller), it will automatically transfer to battery supplying power to theloads via power inverter.

See Workflowas below.

 

LCD displayed as bellow:

          

                                                             Battery available to supply power                          Batteryunavailable,utility supply power      

 Kindly note:

1) There is only one wayto charge the battery: solar panel

2) Thissystem is suitable for areas where electricity is expensive or environmentalareas where solar power can be fully used to save utility bill.such as homesolar&wind system,streetlight solar&wind system

 Parameter

           Mode                                    

700VA

Rated Output Capacity

500W

Peak Power

1000W

Battery Voltage(DC)

12V or 24V

PWM Solar Controller

Voltage

12V or 24V

Current

20A

PV Max Input Voltage

12V System:25V

24V System:50V

Size W×D×H(mm)

335*165*375

Packing Size W×D×H(mm)

355*185*395

Net Weight (kg)

8

Gross Weight (kg)

9

General Parameter

Working Mode (Setting)

1

Utility first (AC first) battery standby mode

2

Sleep Mode,no utility,load’s power is over 5% of rated output power, Inverter start to work automatically

3

Battery first (DC first)utility standby mode

AC Input

Voltage

220V±35% or 110V+35%(Optional)

Frequency

50Hz±3% or 60Hz±3% (Optional)

AC Output

Voltage

220V±3% or 230V±3 or240V±3% or 100V±3% or 110V±3% (Optional)

Frequency

50Hz±0.5 or 60Hz±0.5 (Optional)

Utility charge

AC Charge Current

0~15A

Charge Time

Depend on battery capacity and quantity

Battery Protection

Automatic detection, Charge and discharge protection,Intelligent Management

PV Charge

Total Current of PV Input Should Be Less Than Rated Current of PWM solar controller

Display

Display Mode

LCD+LED

Display Information

Input voltage,output voltage,output frequency,battery capacity,Load condition,Status Information

Output Wave Type

Pure sine wave output,Total Harmonic Distortion THD≤3

Overload Ability

>120% 1 min,>130% 10s

Power Consumption

Sleep Mode

1~6W

Normal Mode

1~3A

Conversion Efficiency

80%~90%

Transfer Time

<5ms (AC to DC / DC to AC)

Protection

Overload output,short-circuit,high-voltage input,low-voltage input,overheat

Environment

Temperature

-10℃~50℃

Humidity

10%~90%

Altitude

≤4000m


 

Theabove is our standard parameter. Subject to change without prior notice.

Wehave our own professional inverter and controller R&D team and we provide technical support and OEM ODM service

Thecontroller information above is our company’s standard parameter.It can bechanged to other PWM solar charge controller.

ConnectionDiagram

 

Others

Please see the outline of the design,technicaldocuments,user manuals,product brochures, etc.Research and developmentdepartment made  1st editionon May 5, 2014


Shenzhen ipandee New Energy Technology & Science Co., Ltd

Tel:+86-15002089033

Contact Person:Henry Feng

PDF Show:PDF

Send Inquiry
captcha
https://kefu5.cckefucloud.com/vclient/chat/?websiteid=p9rjd9g58z6e70x5e6vpx31vpm2kwyb4&wc=39157e7a&clerkid=906266