I-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 700WI-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 700WI-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 700W

I-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 700W

  • Application
  • 1、Back-up UPS system for industrial, commercial, household,etc
  • 2、Removable power and standby power for areas that are lack of utility.
  • 3、Off-grid solar or wind power system
  •   3.1、Off-grid solar or wind power system
  •   3.2、AC first Off-grid solar or wind power system
  •   3.3、DC first Off-grid solar or wind power system

Introduction

In DC/AC inversion mode, users can set this series of inverters to normal working mode or sleep mode. In utility mode, it has Auto Voltage Regulation (AVR) function, utility charging function (AC first model) and UPS function. This multifunctional low frequency pure sine wave inverter has the advantages of stable quality, strong load-carrying ability and long service life. It also can work in poor environment. It is the second generation of our low frequency pure sine wave inverter I-P-XD-series.


Features

1) Easy to install. To configure a solar system, users just need to connect it with solar panels and batteries.

2)CPU management,Intelligent control,modular design

3)LEDs LCD display. LCD can display various parameters(such as the output voltage, frequency, working mode)

4)Multifunction design, AVR UPS function. Users don’t need to buy solar, controller, AC charger or stabilizer.

5) External battery connection, it’s convenient for users to expand use time and back-up power time

6)With super load-carrying ability and high load capacity, this series of  inverters can not only drive resistance load; but also various kinds of inductive loads such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp. It can drive almost any kinds of load

7)Low frequency pure sine wave circuit design, stable quality, easy to maintenance, low failure rate and long service life (under proper operation, it can last at least 5 years)

8) Perfect protection: low voltage protection, high voltage protection, over temperature protection, short-circuit protection, overload protection

9) CE / EMC / LVD/ RoHS /FCC approvals

10) 2 years warranty, life-long technical support

 

Parameter

           Mode                                    

1000VA

Rated Output Capacity

700W

Peak Power

1500W

Battery Voltage(DC)

 24V

PWM Solar Controller

Voltage

24V

Current

20A

PV Max Input Voltage

24V System:50V

Size W×D×H(mm)

335*165*375

Packing Size W×D×H(mm)

355*185*395

Net Weight (kg)

12

Gross Weight (kg)

13

General Parameter

Working Mode (Setting)

1

Utility first (AC first) battery standby mode

2

Sleep Mode,no utility,load’s power is over 5% of rated output power, Inverter start to work automatically

3

Battery first (DC first)utility standby mode

AC Input

Voltage

220V±35% or 110V+35%(Optional)

Frequency

50Hz±3% or 60Hz±3% (Optional)

AC Output

Voltage

220V±3% or 230V±3 or240V±3% or 100V±3% or 110V±3% (Optional)

Frequency

50Hz±0.5 or 60Hz±0.5 (Optional)

Utility charge

AC Charge Current

0~15A

Charge Time

Depend on battery capacity and quantity

Battery Protection

Automatic detection, Charge and discharge protection,Intelligent Management

PV Charge

Total Current of PV Input Should Be Less Than Rated Current of PWM solar controller

Display

Display Mode

LCD+LED

Display Information

Input voltage,output voltage,output frequency,battery capacity,Load condition,Status Information

Output Wave Type

Pure sine wave output,Total Harmonic Distortion THD≤3

Overload Ability

>120% 1 min,>130% 10s


Shenzhen I-Panda New Energy Technology & Science Co., Ltd

Tel:+86-13652416749

Contact Person:Grace

Send your inquiry directly to us
( 0 / 3000 )