I-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 500WI-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 500W

I-P-SPC Low Frequency Inverter with Built-in Solar Charge Controller 500W

  • Introduction
  • In DC/AC inversion mode, users can set this series of inverters to normal working mode or sleep mode. In utility mode, it has Auto Voltage Regulation (AVR) function, utility charging function (AC first model) and UPS function. This multifunctional low frequency pure sine wave inverter has the advantages of stable quality, strong load-carrying ability and long service life. It also can work in poor environment. It is the second generation of our low frequency pure sine wave inverter I-P-XD-series.

Application

1、Back-up UPS system for industrial, commercial, household,etc

2、Removable power and standby power for areas that are lack of utility.

3、Off-grid solar or wind power system

  3.1、Off-grid solar or wind power system

  3.2、AC first Off-grid solar or wind power system

  3.3、DC first Off-grid solar or wind power system

Features

1、pure sine wave output, full power

2、CPU control,intelligent control,modular design

3、LCD display various parameters

4、Multifunction design (AVR, UPS), extra charger is not needed and electric appliances can be protected.

5、External battery connection, it’s convenient for users to expand use time and back-up power time

6、With super load carrying ability and high load capacity, this series of  inverters can not only drive resistance load; but also various kinds of inductive loads, such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp.

7、Low frequency circuit design, stable quality, low failure rate and long service life (under proper operation, it can last at least 5 years)

8、Perfect protection: low voltage protection, high voltage protection, over temperature protection, short-circuit protection, overload protection, alarm alert

9、CE / EMC / LVD/ RoHS Approvals

10、Two years warranty, life-long technical support

Parameter

                 Model                             Parameter

700VA

Rated Output Capacity

500W

Peak Power

1000W

Battery Voltage(DC)

12V/24V(optional)

Size W×D×H(mm)

335*165*375

Packing Size W×D×H(mm)

355*185*395

Net Weight (kg) 

8

Gross Weight (kg) 

9

General Parameter

Working Mode

1

Utility first (AC first) battery standby mode

(Setting)

2

Sleep Mode,no utility,load’s power higher than 5% of  inverter rated output power,it will start to work automatically

 

3

Battery first (DC first)utility standby UPS mode

AC Input

Voltage

220V±35% or 110V+35%(optional)

Frequency

50Hz±3% or 60Hz±3% (optional)

AC Output

Voltage

220V±3% or 230V±3 or 240V±3% or 100V±3% or 110V±3% (optional)

Frequency

50Hz±0.5 or 60Hz±0.5 (optional)

Battery charge

AC Charge Current

0~15A

Charge Time

Depend on battery capacity and quantity

Battery Protection

Automatic detection, Charge and discharge protection,Intelligent Management

Display

Display Mode

LCD

Display Information

Input voltage,output voltage,output frequency,battery capacity,Load condition,Status Information

Output Wave Type

Pure sine wave output,Total Harmonic Distortion THD≤3

Overload Ability

>120% 1 min,>130% 10s

Power Consumption

Sleep Mode

1~6W

Normal Mode

1~3A

Conversion Efficiency

80%~90%

Transfer Time

<5ms (AC to DC / DC to AC)

Protection

Overload ,Short-circuit,High input voltage,Low input voltage,Overheat

Environment

Temperature

-10℃~50℃

Humidity

 10%~90%

Altitude

≤4000m


Shenzhen I-Panda New Energy Technology & Science Co., Ltd

Tel:+86-13652416749

Contact Person:Grace

Send your inquiry directly to us
( 0 / 3000 )