- Sfoglia le categorie
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT Solar Smart Digital Controller
- RUNNER MPPT Solar Smart Digital Controller
- GALAXY serie ad alta potenza
- Marte serie all'aperto
- regolatore solare MPPT serie eSmart
- Regolatore solare serie MPTER MASTER
- Accessori
- (Fuori prodotto) Regolatore solare MPPT
- (Fuori produzione) Inverter serie SP 350W-20000W
- (È stato rimosso)
- (Fuori produzione) Inverter serie I-Panda SPC
- Certificazioni
-
- sottoscrivi
-
Ricevi aggiornamenti via e-mail sui nuovi prodotti
- Contattaci
-
Tel: + 86-755-23091101 & + 86-755-23091100
Fax: + 86-755-23091102
Informazioni: info@ipandee.com.
Indirizzo: Floor 2, Building A2, Lilang Software Park, No. 31, Bullan Road, Nanwan Street, Distretto di Longgang, Shenzhen
CODICE CINALE: 518000 Contatta ora
- Seguici
-
-
Perché la tensione di avviamento dell'inverter è superiore alla tensione minima?
Nell'inverter collegato alla rete fotovoltaica, un parametro è strano, cioè la tensione di avviamento dell'ingresso dell'inverter. Questa tensione ... -
Come risolvere PV inverter AC problema sovratensioni?
orafotovoltaicoLa generazione di energia in rete sta diventando sempre più popolare e le case delle persone comuni possono vedere le centrali fotovol... -
La differenza tra un'onda sinusoidale migliorata e un inverter a onda sinusoidale pura
Questo articolo descrive la differenza tra un'onda sinusoidale migliorata e un inverter a onda sinusoidale pura. Onda pura modificata: Gli inverter pe... -
Le migliori dieci aziende di inverter fotovoltaici del mondo
Il regolatore di potenza dell'inverter noto anche, secondo il sistema inverter PV uso può essere suddivisa in rete di alimentazione indipendente e ut... -
Qual è la differenza tra la funzione MPPT e l'inverter solare senza funzione MPPT?
Il controller MPPT utilizza la tecnologia di tracciamento del punto di massima potenza per estrarre la massima potenza dall'array solare per caricare ... -
Perché l'inverter dovrebbe smettere di funzionare quando la rete è scarica?
Alcune persone nella realizzazione di impianti fotovoltaici, si terrà una sorta di "interruzione di corrente, anche se c'è il sole, le loro case han... -
Il primo impianto di riciclaggio di pannelli fotovoltaici per rifiuti in Europa
I pannelli solari hanno una durata di servizio da 20 a 30 anni. Con un paio di anni fa, dopo che la produzione di massa di produzione solare globale, ... -
Gli scienziati hanno scoperto che la sabbia può produrre materiali di silicio a celle solari
Secondo un rapporto dell'agenzia di stampa Kyodo, il 6 novembre, i visiting professor dell'Università di Tokyo, Sugawara, e altri hanno aperto uno st... -
Modello di concorrenza sul mercato del deposito di energia domestica
Stoccaggio di energia come nuovo mercato per molti produttori di batterie in Cina e in CinaInverterI venditori offrono l'opportunità di espandere nuo... -
Il Portogallo realizzerà il 100% di energia rinnovabile nel 2050
Ministro portoghese dell'Ambiente e dell'Energia trasformazione Jo? OPedroMatos Fernandes ha rivelato che il Portogallo 2050 è carbon neutral e ogget...
-
alta qualità 12v 24v 48v 30a mppt regolatore di carica solare per strada sistema leggero
- DC inpurt: lavoro auto 12V/24V/48V DC
- Max.Charge attuale: 30A
- Max.PV tensione di ingresso: DC 100V
- Efficienza di conversione: Max.upto 99%
- Modalità di carica: tre fasi di charge(MPPT) veloce, tensione costante, carica di galleggiante
- Porta di comunicazione RS 232
- Display a LED
Introduction
This is a I-panda I-P-eSMART series MPPT (maximum Power Point Tracking) smart solar controller, with charging and discharging function, increasing 30%~60% efficiency than traditional PWM controller. It has automatic recognition function, three Stages charging function, also supports many kinds of battery charging and discharging, RS232 communication etc, It’s our company’s MPPT solar controller e-SMART series.
Features
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/48V battery system automatic recognition, users would like to use in different system conveniently.
3. DC12V/24V/48V system, maximum PV input voltage up to DC100V.
4. Charge type: three stages charge fast charge(MPPT), constant voltage,
floating charge, protected our battery, lead to a long use age.
5. Discharge type owns always on pattern and always off pattern, it also has PV voltage solar controlling switch pattern.
6. Clients can auto select any one in the 4 kinds of commonly used batteries, Sealed lead acid, vented, Gel, NiCd and custom other batteries.
7. Digital tube display controller battery voltage and charging current,upper computer display various parameters, such as model, PV input voltage, battery types, battery voltage, charging current, charging power, working condition etc.
8. RS232 communication, and that providing communication protocol, it’s convenient for customer’s integration management.
9. This controller could be paralleled infinitely.
10. CE, RoHS Certifications approved; cooperating with clients through the other certifications.
11. 2 years warranty; 3~10 years extended technical service.
Products photos
Parameters
MPPT solar controller modes: |
30A |
||
Charge mode |
MPPT(maximum power point tracking) |
||
Charge method |
Three stages: constant current(MPPT),constant voltage,floating charge |
||
System type |
DC12V/24V/48V |
Automatic recognition |
|
System voltage |
12V system |
DC9V~DC15V |
|
24V system |
DC18V~DC30V |
||
48V system |
DC36V~DC60V |
||
Soft start time |
12V/24V/48V system |
≤3S |
|
Dynamic response recovery and range |
12V/24V/48V system |
500us |
|
MPPT efficiency |
12V/24V/48V system |
≥96.5%,≤99% |
|
INPUT CHARACTERISTICS |
|||
MPPT working voltage and Range |
12V system |
DC14V~DC100V |
|
24V system |
DC30~DC100V |
||
48V system |
DC60~DC100V |
||
Low voltage input Protection point |
12V system |
DC14V |
|
24V system |
DC30V |
||
48V system |
DC60V |
||
Low voltage input Recovery point |
12V system |
DC18V |
|
24V system |
DC34V |
||
48V system |
DC65V |
||
Input over voltage protection point |
12V/24V/48V system |
DC110V |
|
Input over voltage recovery point |
12V/24V/48V system |
DC100V |
|
Maximum PV power |
12V system (W) |
426 |
|
24V system (W) |
852 |
||
48V system (W) |
1704 |
||
CHARGE CHRECTRESTICS |
|||
Selectable Battery Types (Default type is GEL battery) |
12V/24V/48V system |
Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined)) |
|
Constant Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Floating Charge Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Rated Input Current |
12V/24V/48V system |
30A |
|
Current-limiting Protection |
12V/24V/48V system |
35A |
|
Temperature Factor |
12V/24V/48V system |
±0.02%/℃ |
|
Temperature Compensation |
12V/24V/48V system |
14.2V-(The highest temperature-25℃)*0.3 |
|
Output Ripples(peak) |
12V/24V/48V system |
200mV |
|
Output Voltage Stability Precision |
12V/24V/48V system |
≤±1.5% |
|
Output Discharge Characteristics |
|||
Output voltage |
Base on battery voltage |
||
Low voltage output Protection point |
Default 10.5V; recovery 11V; custom available ; |
||
Rated output Current |
30A |
||
The output control |
Always on, always off, PV voltage control switch |
||
Output control set mode |
Controller button or upper computer |
||
Display |
|||
LED digital tube display |
Battery voltage, charge current |
||
LED light display |
Charging indicator light, LOAD indicator light |
||
PC(communication port) |
RS232 |
||
Protection |
|||
Input Low Voltage Protection |
Check the input characteristics |
||
Input Overvoltage Protection |
Check the input characteristics |
||
Charge over voltage power Protection |
yes |
||
Low Voltage output Protection |
yes |
||
Rated output Current protection |
yes |
||
Temperature Protection |
yes |
||
Other Parameters |
|||
Noise |
≤40dB |
||
Thermal heat-dissipating method |
Itself cooling |
fan cooling |
|
Components |
Imported material, with EU standards. |
||
Certification |
CE\FCC\ROHS |
||
Physical |
|||
Measurement D x W x H(mm) |
205*168*60 |
||
package size D x W x H(mm) |
265*196*110 |
||
N.G(KG) |
1.8kg |
||
G.N(KG) |
2kg |
||
Type of Mechanical Protection |
IP25 |
||
Environment |
|||
Humidity |
0~90%RH ( no condense) |
||
Altitude |
0~3000m |
||
Operating Temperature |
-20℃ ~ +50℃ |
||
Storage Temperature |
-40℃ ~ +75℃ |
||
Atmospheric Pressure |
70~106kPa |
Tel:+86 15002089033
Referente:wenshen huang
PDF Show.:PDF