- Durchsuche Kategorien
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT Solar Smart Digital Controller
- RUNNER MPPT Solar Smart Digital Controller
- GALAXY Hochleistungsserie
- Mars Outdoor-Serie
- MPPT-Solarregler der Serie eSMART
- MPPT-Solarregler der Serie MASTER
- Zubehör
- (Aus dem Produkt) MPPT-Solarregler der WISER-Serie
- (Nicht mehr in Produktion) Wechselrichter SP
- (Wurde entfernt)
- (Nicht mehr in Produktion) Wechselrichter
- Zertifizierungen
-
- Abonnieren
-
Erhalten Sie E-Mail-Updates zu neuen Produkten
- Kontaktiere uns
-
Tel: + 86-755-23091101 & + 86-755-23091100
Fax: + 86-755-23091102
Information: info@ipandee.com.
Adresse: Etage 2, Gebäude A2, Lilang-Softwarepark, Nr. 31, Bulaner Straße, Nanwan Street, District Longgang, Shenzhen
China Postleitzahl: 518000 Kontaktieren Sie mich jetzt
- Folge uns
-
-
Warum ist die Startspannung des Wechselrichters höher als die Mindestspannung?
Bei dem netzgekoppelten Photovoltaik-Wechselrichter ist ein Parameter ungewöhnlich, dh die Eingangsspannung des Wechselrichters. Diese Spannung ist e... -
Wie kann das Überspannungsproblem des Wechselrichters gelöst werden?
JetztPhotovoltaikDie Stromerzeugung über das Stromnetz wird immer beliebter, und die Häuser der Bürger können PV-Kraftwerke in Echtzeit sehen. Fü... -
Der Unterschied zwischen einer verbesserten Sinuswelle und einem reinen Sinuswechselrichter
Dieser Artikel beschreibt den Unterschied zwischen einer verbesserten Sinuswelle und einem reinen Sinuswechselrichter. ModifiedSine Pure Wave: Die geb... -
Die zehn größten PV-Wechselrichter-Unternehmen der Welt
Der Wechselrichter wird auch als Leistungsregler bezeichnet und kann je nach Verwendung des Wechselrichters in der Photovoltaik-Stromerzeugung in zwei... -
Warum sollte der Wechselrichter aufhören zu arbeiten, wenn das Netz leer ist?
Manche Menschen installieren eine Photovoltaik-Anlage, sie haben die Mentalität "Selbst wenn das Stromnetz abgeschaltet ist, wenn die Sonne scheint u... -
Was ist der Unterschied zwischen MPPT-Funktion und Solar Inverter ohne MPPT-Funktion?
Der MPPT-Controller verwendet die Maximum Power Point Tracking-Technologie, um die maximale Leistung aus dem Solarfeld zu entnehmen, um die Batterie a... -
Europas erste Recyclinganlage für Photovoltaik-Altgeräte
Sonnenkollektoren haben eine Lebensdauer von 20 bis 30 Jahren. Neben der Massenproduktion der globalen Solarenergie-Industrie in den letzten Jahren wi... -
Wissenschaftler haben entdeckt, dass Sand Siliziummaterialien aus Solarzellen herstellen kann
Laut einem Bericht der Nachrichtenagentur Kyodo vom 6. November eröffneten Gastprofessoren der Universität Tokio, Sugawara und andere, eine gemeinsa... -
Wettbewerbsmuster des inländischen Energiespeichermarktes
Energiespeicher als neuer Markt für viele Batteriehersteller in China undInverterVerkäufer bieten die Gelegenheit, neue Angelegenheiten auszuweiten ... -
Portugal wird im Jahr 2050 100% erneuerbare Energie liefern
Der portugiesische Minister für Umwelt und Energiewende João Pedro Matos Fernandes gab bekannt, dass Portugal sein Ziel der CO2-Neutralität bis 205...
-
high quality 12v 24v 48v 30a mppt solar charge controller for street light system
- DC inpurt: DC 12V/24V/48V auto work
- Max.charge current: 30A
- Max.PV input voltage: DC 100V
- Conversion effeciency: Max.upto 99%
- Charge mode: three stages of fast charge(MPPT), constant voltage,floating charge
- RS 232 communication port
- LED display
Introduction
This is a I-panda I-P-eSMART series MPPT (maximum Power Point Tracking) smart solar controller, with charging and discharging function, increasing 30%~60% efficiency than traditional PWM controller. It has automatic recognition function, three Stages charging function, also supports many kinds of battery charging and discharging, RS232 communication etc, It’s our company’s MPPT solar controller e-SMART series.
Features
1. MPPT charging mode, peak efficiency up to 99%, saving 30%~60% solar panel than traditional PWM controller.
2. DC12V/24V/48V battery system automatic recognition, users would like to use in different system conveniently.
3. DC12V/24V/48V system, maximum PV input voltage up to DC100V.
4. Charge type: three stages charge fast charge(MPPT), constant voltage,
floating charge, protected our battery, lead to a long use age.
5. Discharge type owns always on pattern and always off pattern, it also has PV voltage solar controlling switch pattern.
6. Clients can auto select any one in the 4 kinds of commonly used batteries, Sealed lead acid, vented, Gel, NiCd and custom other batteries.
7. Digital tube display controller battery voltage and charging current,upper computer display various parameters, such as model, PV input voltage, battery types, battery voltage, charging current, charging power, working condition etc.
8. RS232 communication, and that providing communication protocol, it’s convenient for customer’s integration management.
9. This controller could be paralleled infinitely.
10. CE, RoHS Certifications approved; cooperating with clients through the other certifications.
11. 2 years warranty; 3~10 years extended technical service.
Products photos
Parameters
MPPT solar controller modes: |
30A |
||
Charge mode |
MPPT(maximum power point tracking) |
||
Charge method |
Three stages: constant current(MPPT),constant voltage,floating charge |
||
System type |
DC12V/24V/48V |
Automatic recognition |
|
System voltage |
12V system |
DC9V~DC15V |
|
24V system |
DC18V~DC30V |
||
48V system |
DC36V~DC60V |
||
Soft start time |
12V/24V/48V system |
≤3S |
|
Dynamic response recovery and range |
12V/24V/48V system |
500us |
|
MPPT efficiency |
12V/24V/48V system |
≥96.5%,≤99% |
|
INPUT CHARACTERISTICS |
|||
MPPT working voltage and Range |
12V system |
DC14V~DC100V |
|
24V system |
DC30~DC100V |
||
48V system |
DC60~DC100V |
||
Low voltage input Protection point |
12V system |
DC14V |
|
24V system |
DC30V |
||
48V system |
DC60V |
||
Low voltage input Recovery point |
12V system |
DC18V |
|
24V system |
DC34V |
||
48V system |
DC65V |
||
Input over voltage protection point |
12V/24V/48V system |
DC110V |
|
Input over voltage recovery point |
12V/24V/48V system |
DC100V |
|
Maximum PV power |
12V system (W) |
426 |
|
24V system (W) |
852 |
||
48V system (W) |
1704 |
||
CHARGE CHRECTRESTICS |
|||
Selectable Battery Types (Default type is GEL battery) |
12V/24V/48V system |
Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined)) |
|
Constant Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Floating Charge Voltage |
12V/24V/48V system |
Please check the charge voltage according to the battery type form. |
|
Rated Input Current |
12V/24V/48V system |
30A |
|
Current-limiting Protection |
12V/24V/48V system |
35A |
|
Temperature Factor |
12V/24V/48V system |
±0.02%/℃ |
|
Temperature Compensation |
12V/24V/48V system |
14.2V-(The highest temperature-25℃)*0.3 |
|
Output Ripples(peak) |
12V/24V/48V system |
200mV |
|
Output Voltage Stability Precision |
12V/24V/48V system |
≤±1.5% |
|
Output Discharge Characteristics |
|||
Output voltage |
Base on battery voltage |
||
Low voltage output Protection point |
Default 10.5V; recovery 11V; custom available ; |
||
Rated output Current |
30A |
||
The output control |
Always on, always off, PV voltage control switch |
||
Output control set mode |
Controller button or upper computer |
||
Display |
|||
LED digital tube display |
Battery voltage, charge current |
||
LED light display |
Charging indicator light, LOAD indicator light |
||
PC(communication port) |
RS232 |
||
Protection |
|||
Input Low Voltage Protection |
Check the input characteristics |
||
Input Overvoltage Protection |
Check the input characteristics |
||
Charge over voltage power Protection |
yes |
||
Low Voltage output Protection |
yes |
||
Rated output Current protection |
yes |
||
Temperature Protection |
yes |
||
Other Parameters |
|||
Noise |
≤40dB |
||
Thermal heat-dissipating method |
Itself cooling |
fan cooling |
|
Components |
Imported material, with EU standards. |
||
Certification |
CE\FCC\ROHS |
||
Physical |
|||
Measurement D x W x H(mm) |
205*168*60 |
||
package size D x W x H(mm) |
265*196*110 |
||
N.G(KG) |
1.8kg |
||
G.N(KG) |
2kg |
||
Type of Mechanical Protection |
IP25 |
||
Environment |
|||
Humidity |
0~90%RH ( no condense) |
||
Altitude |
0~3000m |
||
Operating Temperature |
-20℃ ~ +50℃ |
||
Storage Temperature |
-40℃ ~ +75℃ |
||
Atmospheric Pressure |
70~106kPa |
Tel:+86 15002089033
Gesprächspartner:Wenshen Huang
PDF-Show.:PDF