- 浏览分类
- EMMPT48 series MPPT solar charge controller
- The Explorer-NS series MPPT solar charge controlle
- MPPT solar charge controller eSmart4
- EXPLORER-M MPPT Solar Smart Digital Controller
- EXPLORER MPPT太阳能智能数字控制器
- RUNNER MPPT太阳能智能数字控制器
- GALAXY大功率系列MPPT太阳能控制器
- MARS户外系列 MPPT太阳能控制器
- eSMART系列MPPT太阳能控制器
- MASTER系列MPPT太阳能控制器
- 配件
- (已下架)WISER系列MPPT太阳能控制器
- (已下架)变频器SP系列350W-20000W
- (已下架)
- (已下架)I-Panda SPC系列变频器
- 认证
-
- 订阅
-
获取有关新产品的电子邮件更新
- 联系我们
-
电话:+ 86-755-23091101&+ 86-755-23091100
传真:+ 86-755-23091102
信息:info@ipandee.com
地址:深圳市龙岗区南湾街道布澜路31号李朗软件园A2栋2楼
中国邮政编码:518000 现在联系
- 跟着我们
-
-
为什么逆变器的启动电压比最低电压高?
在光伏并网逆变器中,有一个参数比较奇怪,那就是逆变器输入启动电压。 这个电压比最低工作电压要高30V左右,如单相逆变器,MPPT工作电压是70V到5... -
怎么解决光伏逆变器交流过压问题?
现在光伏并网发电越来越普及,寻常的百姓家也能实时见到光伏电站的身影了。然而,对老百姓来讲,对光伏并网系统尤其是并网逆变器仍然没有像对电视... -
改进的正弦波和纯正弦波逆变器之间的区别
本文介绍改进的正弦波和纯正弦波逆变器之间的区别 ModifiedSine纯波:最常见的通用逆变器可用于“修正正弦波”多种类型,与纯正弦波模型相比,通... -
全球十大光伏逆变器企业
逆变器又称电源调整器,根据逆变器在光伏发电系统中的用途可分为独立型电源用和并网用二种。根据波形调制方式又可分为方波逆变器、阶梯波逆变器、... -
MPPT功能和不带MPPT功能的太阳能逆变器有什么区别?
MPPT控制器利用最大功率点跟踪技术从太阳能阵列中提取最大的功率为蓄电池充电。最大功率点跟踪方式完全自动,不需要用户调整。在阵列最大功率点随... -
电网停电时逆变器为什么要停止工作?
有些人在安装光伏系统时,会抱着一种“即使电网停电,如果有太阳,自己家也能用上电”的心态,现实情况是,电网停电时,自己家的光伏发电系统只会... -
欧洲首家废弃光伏板回收工厂
太阳能电池板的使用寿命为20年至30年。随着前几年全球太阳能制造业的大量生产,若干年后,全世界将掀起一波光伏板的“报废潮”,到2050年甚至会达... -
科学家发现沙子可造太阳能电池硅材料
据日本共同社11月6日报导,日本东京大学客座教授鲤沼秀臣等人与阿尔及利亚奥兰科学技能大学打开共同研究,发现可以用沙漠的沙子低价制作太阳能电... -
国内储能市场竞争格局
储能作为一个新式的市场,为我国数量很多的电池厂商和逆变器厂商带来了拓展新事务、改动原有事务职业地位的时机。 2018年以来,快速开展的我国储... -
葡萄牙2050年将实现100%可再生能源供电
葡萄牙环境和能源转型部长Jo?oPedroMatos Fernandes日前透露,葡萄牙将到2050年实现碳中和目标,即到2050年,葡萄牙将通过可再生能源覆盖其电力总...
-
I-P-SPC Low Frequency Solar Power Inverter with Built-in Solar Charge Controller 700W
- I-P-SPC inverter has high conversion efficiency, low power consumption, super load-carrying ability, large charging current etc. Users can set output priority (AC first or DC first) .
- Function
- Battery charge Ups AVR voltage regulator
- Strong overload ability
- Low frequency Design
- DC first /AC first
- Sleep Function
- Charge Function
- DC to AC Funiction
- UPS Function
- Output wave form:Pure sine wave
- Material:Metal
- Display:LCD and LED
- controller built-in: yes
- modul structure: Yes
I-P-SPC Series LowFrequency Solar Power Inverter with Built-in SolarCharge Controller 700W
Component
1)Highquality low frequency pure sine wave inverter(with utility charge
function and UPS function)
2)Built-in PWMsolar power charge controller
Application
2) Utility and solar complementarypower generation system
Features
1) Easy to install. To configure a solarsystem, users just need to connect it with solar panels and batteries.
2)CPU management,Intelligent control,modulardesign
3)LEDs LCD display. LCD can display variousparameters(such as the output voltage, frequency, working mode)
4)Multifunction design, AVR UPS function.Users don’t need to buy solar, controller, AC charger or stabilizer.
5) Externalbattery connection, it’s convenient for users to expand use time and back-uppower time
6)With super load-carrying ability and highload capacity, this series of inverterscan not only drive resistance load; but also various kinds of inductive loads suchas motor, air conditioner, electric drills, fluorescent lamp, gas lamp. It candrive almost any kinds of load
7)Low frequency pure sine wave circuitdesign, stable quality, easy to maintenance, low failure rate and long servicelife (under proper operation, it can last at least 5 years)
8) Perfect protection: low voltageprotection, high voltage protection, over temperature protection, short-circuitprotection, overload protection
9) CE / EMC / LVD/ RoHS /FCC approvals
10) 2 years warranty, life-long technical support
Function
Off-grid solar power system
1. When connected withbattery and AC loads,users can set it to normal working mode or sleep mode.
1.1 Normal working mode:FREQUENCY in the LCD display is set to 01. No matter it’s connected AC loads or not, theinverter always convert DC to AC. It’sready to supply power to the AC loads. In this mode, the LCD will displayoutput voltage as bellow:
1.2 Sleep mode:FREQUNCYin the LCD display is set as 02.If the power of the connected AC loads is lowerthan 5% of the inverter’s rated power, there will be no output from theinverter. Only the chip of inverter is working. The power consumption of theinverter is only 1-6W. The LCD shows the output voltage 0. If the power of theconnected loads is over 5%,then the inverter will automatically convert DC toAC to supply power for the loads within 5s. The LCD shows the output voltage.As shown below:
Kindly note:
1) Only the solar panel charges thebattery
2) Off-grid solar power system. It issuitable for areas that are lack of utility or plentiful solar
Utility andsolar complementary power generation system
2. UPS function When the inverter is connected to battery andutility, users can set it to utility first (AC first) battery standby mode orbattery first (DC first)utility standby mode.
2.1.Utilityfirst (AC first) battery standby mode : FREQUENCY in the LCD display is set to 01.When utility and battery are connected to the inverter, utility will supplypower to the loads prior. When utility is cut off, the battery willautomatically continue to supply power via power inverter.
Stepsare as follows:
Step1: When utility is available, it will drive the loads directly after voltagebeing stabilized and at the same time charge batteries via power inverter .
Step2: When utility is cut off, the inverter will convert DC to AC automatically toensure uninterrupted power supply within 5ms.
Step3: When utility is available again, inverter will automatically transfer toutility supplying power to loads and charge batteries via power inverter at thesame time.
See Workflowas below.
LCDdisplayed as bellow:
Utility supplypower and charge battery Withoututility and battery supply power
Kindly note:
1) There are 2 ways to charge thebattery, utility and solar panel
2) This system is suitable for powersystems built in areas that are lack of utility. Or people can use solar andutility at the same time.
2.2. Batteryfirst (DC first)utility standy mode: FREQUENCY in the LCD display is set as 03. When utility andbattery are connected to the inverter, battery will supply power to the loadsprior to utility. When battery capacity is not enough, utility will continue tosupply power automatically.
Steps are as follows:
Step1: When battery is available, it will drive the AC loads via power inverter.
Step2: When battery does not have enough power, it will automatically transfer toutility supplying power to the loads
Step3: After the battery is fully charged (e.g. by solar or wind chargecontroller), it will automatically transfer to battery supplying power to theloads via power inverter.
See Workflowas below.
LCD displayed as bellow:
Battery available to supply power Batteryunavailable,utility supply power
Kindly note:
1) There is only one wayto charge the battery: solar panel
2) Thissystem is suitable for areas where electricity is expensive or environmentalareas where solar power can be fully used to save utility bill.such as homesolar&wind system,streetlight solar&wind system
Parameter
Mode |
1000VA |
||
Rated Output Capacity |
700W |
||
Peak Power |
1500W |
||
Battery Voltage(DC) |
24V |
||
PWM Solar Controller |
Voltage |
24V |
|
Current |
20A |
||
PV Max Input Voltage |
24V System:50V |
||
Size W×D×H(mm) |
335*165*375 |
||
Packing Size W×D×H(mm) |
355*185*395 |
||
Net Weight (kg) |
12 |
||
Gross Weight (kg) |
13 |
||
General Parameter |
|||
Working Mode (Setting) |
1 |
Utility first (AC first) battery standby mode |
|
2 |
Sleep Mode,no utility,load’s power is over 5% of rated output power, Inverter start to work automatically |
||
3 |
Battery first (DC first)utility standby mode |
||
AC Input |
Voltage |
220V±35% or 110V+35%(Optional) |
|
Frequency |
50Hz±3% or 60Hz±3% (Optional) |
||
AC Output |
Voltage |
220V±3% or 230V±3 or240V±3% or 100V±3% or 110V±3% (Optional) |
|
Frequency |
50Hz±0.5 or 60Hz±0.5 (Optional) |
||
Utility charge |
AC Charge Current |
0~15A |
|
Charge Time |
Depend on battery capacity and quantity |
||
Battery Protection |
Automatic detection, Charge and discharge protection,Intelligent Management |
||
PV Charge |
Total Current of PV Input Should Be Less Than Rated Current of PWM solar controller |
||
Display |
Display Mode |
LCD+LED |
|
Display Information |
Input voltage,output voltage,output frequency,battery capacity,Load condition,Status Information |
||
Output Wave Type |
Pure sine wave output,Total Harmonic Distortion THD≤3 |
||
Overload Ability |
>120% 1 min,>130% 10s |
||
Power Consumption |
Sleep Mode |
1~6W |
|
Normal Mode |
1~3A |
||
Conversion Efficiency |
80%~90% |
||
Transfer Time |
<5ms (AC to DC / DC to AC) |
||
Protection |
Overload output,short-circuit,high-voltage input,low-voltage input,overheat |
||
Environment |
Temperature |
-10℃~50℃ |
|
Humidity |
10%~90% |
||
Altitude |
≤4000m |
Theabove is our standard parameter. Subject to change without prior notice.
Wehave our own professional inverter and controller R&D team and we provide technical support and OEM ODM service
Thecontroller information above is our company’s standard parameter.It can bechanged to other PWM solar charge controller.
ConnectionDiagram
Others
Pleasesee the outline of the design,technical documents,user manuals,productbrochures, etc.Research and development department made 1st edition on May 5, 2014..